FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
looking for turn key engine package....
I've looked at Tuff Dawg on ebay, not too impressed
I've also looked at Kaufmann Racing Engines but I'm still waiting for their catalog Any suggestions? |
#2
|
||||
|
||||
Welcome , spend some time , use the "search" button . Lots of good info on here .
Also, there are quality engine builders that post here . good luck
__________________
69 Grand Prix 428 H.O. loaded "J" 11.51 @ 116 |
#3
|
||||
|
||||
Based on your location designation, I assume you're not in Virginia (right to work state); but in case you're close- Jim Lehart (Mr. Pbody) Central Virginia Machine Service runs a full service shop. If you have access to Jim Hand's book, "How to Build Max Performance Pontiac V-8's", you will see several of Jim's builds in the back:
http://www.google.com/url?q=http://w...5tQb1UduMBF4nA
__________________
Will Rivera '69 Firebird 400/461, 290+ E D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears ‘66 Lemans, 455, KRE D-Ports, TH350, 12 bolt 3.90 gears '64 LeMans 400/461, #16 Heads, HR 230/236, TKO600, 9inch Rear, 3.89 gears (Traded) '69 LeMans Vert, 350, #47 heads: Non-running project |
#4
|
|||
|
|||
spotts, butler,
|
#5
|
||||
|
||||
|
#6
|
||||
|
||||
All of the above, and Ken's Speed and Machine in Brooksville Fl.
https://sites.google.com/site/ksmsinc/engines |
#7
|
||||
|
||||
Ditto on Ken's Speed and Machine. He's built a few killer motors for me.
Picked up a street/strip motor fresh off his test stand; took it home and dropped it in one of my Ponchos; drove it to the strip that night, raced it, and drove it home. Can't get more turn key than that. Jim
__________________
65 Catalina sedan. Allen Thomas Performance 495. KRE Heads at 310cfm ported by SD Performance, ProSystems Dominator carb on ported Victor intake, P-Dude custom grind hydraulic roller, MSD ignition, 3.50 Moser/Ford rear. F-Glass front bumper by son Rob, rear by the old man and joint effort for trunk lid. 3950# w/driver. Best of 9.5761/139 on 175 shot, 6.01 /114 in 1/8. |
#8
|
||||
|
||||
If near SE Pa., Martyn Motors in Morrisville , PA. They build everything including a large number of Pontiacs. Been in business since the 1940's and are a full service machine shop, crankshafts including cast iron welding/grinding, balancing, aluminum repair, you name it. Honest and stand behind their work.
__________________
___________________________________ "Objects in mirror are closer than they appear" |
#9
|
||||
|
||||
there are also these guys:
http://www.nitemareperformance.150m.com/ then you could always have one of these. daily driver to all out: http://www.wix.com/lmc3470/ramairv and this guy too: http://www.pontiacengines.net/ where are you located?, maybe someone could direct you local. |
#10
|
||||
|
||||
Also try www.sdperformance.com
|
#11
|
|||
|
|||
SD Performance is whom I would highly reccomend as well from first hand experience. Outstanding custormer service and advice. Call them and discuss your intentions, you will not be disapointed.
There are a lot of terrific engine builders on this site and several will help you out with a quality power plant, continue your homework and call each of them and discuss your intent. Tim john--- |
#12
|
|||
|
|||
Zig where are u located?
|
Reply |
|
|