FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
The Body Shop TECH General questions that don't fit in any other forum |
Reply |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Is there a way to "fix" worn hood hinges?
On my 69 Goat, I finally got to reinstall the hood, once all bolted down and tight and the hood is closed, the rear of the hood sticks up a good 3/4", possibly more....it does it more on the pass side than the drivers side. You can push down slightly on the hood and it goes back to the proper position......are these hinges just worn out or am I missing something?
Seems I read somewhere when I was building my 69 Camaro that you could "fix" hood hinges by "smashing" the rivets, or pivot points while they are heated up red hot with a torch, thus expanding the pin and creating less overall slop in the hinge assy. Anyone heard of this? I'm trying to avoid buying new hinges....I've got more in this thing than I really want. Thanks for your time guys, ~Joe
__________________
Good judgement comes from experience.....experience comes from....well....that comes from bad judgement. Build thread for my poppa ~~> CLICKY CLICKY |
#2
|
|||
|
|||
you can peen the rivets but its tricky getting them not too tight
Ive never heated them just used a 20 ton press. The problem could be eggshaped holes and worn rivets, re-crimping,is only a bandaid if thats the case.
__________________
Everything comes and goes Pleasure moves on too early And trouble leaves too slow |
#3
|
|||
|
|||
SMS in New Hampshire rebuilds them with new rivets.
They also re-phosphate them as well. Great work! |
#4
|
|||
|
|||
Cammer, your prolly right, I didn't think about eggshaped....I guess I'll just get new hinges.
442...what is SMS? More info please...link possibly? Thanks gentlemen, ~Joe
__________________
Good judgement comes from experience.....experience comes from....well....that comes from bad judgement. Build thread for my poppa ~~> CLICKY CLICKY |
#5
|
||||
|
||||
Check the April 2012 issue of Smoke Signals. Detailed article in there on hinge problems and repair. Also, the author can repair/restore yours, if so desired.
Alan |
#6
|
|||
|
|||
|
#7
|
||||
|
||||
Just read this yesterday, Great article. I just joined and rcvd a few back issues
__________________
'63 Catalina Safari, Silverleaf Green / Cameo Ivory, nice options, 4 speed '66 Grand Prix, Marina Turquoise, 421 HO, many options, 4 speed My Garage Tarheel Tigers Pontiac Club of Raleigh, NC |
#8
|
||||
|
||||
Quote:
They look great other than the generic rivets. They need to use correctly marked rivets to really be a restoration. I am currently working on the fault. |
#9
|
|||
|
|||
circles in them?
__________________
Everything comes and goes Pleasure moves on too early And trouble leaves too slow |
#10
|
|||
|
|||
More pictures.....
|
#11
|
|||
|
|||
are those painted when they come back?
Ive done a few sets and have always phosphated them as the factory did
__________________
Everything comes and goes Pleasure moves on too early And trouble leaves too slow |
#12
|
|||
|
|||
That's what I am looking for also
|
#13
|
|||
|
|||
The hinges in my pictures are phospated, not painted.
|
#14
|
||||
|
||||
Pet peeve, cant stand painted hood hinges!!!!
__________________
1969 GTO 4spd. Antique Gold/black, gold int. 1969 GTO RAIII 4spd. Verdoro Green/black, black int. 1969 GTO 4spd. Crystal Turquoise, black int. 1970 GTO 4spd VOE Pepper Green, green int. 1967 LeMans 428 Auto. Blue, black int. |
#15
|
||||
|
||||
X2. Roland did the hinges on my '64 GTO and they came out awesome. He's a mechanical engineer by trade and hand makes each rivet in his shop. Very impressive operation. He's a Pontiac guy too with a very nice '65 GTO (original owner).
__________________
"What ain't no country I ever heard of. They speak English in What?" - Jules Winnfield ------------------------------ 2015 Jaguar F-Type 340hp Convertible, Polaris White/Ebony Interior 1964 Pontiac GTO, Tri-Power, 4 Speed, Grenadier Red/Black Interior 1965 Chrysler 300 Convertible, 383/727TF, Factory Air, Spanish Red/Red Interior/White Top |
#16
|
||||
|
||||
So if the hinge is a little bent does it stay straight after the repair and not bend there again?
__________________
Skip Fix 1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever! 1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand 1965 GTO 4 barrel 3 speed project 2004 GTO Pulse Red stock motor computer tune 13.43@103.4 1964 Impala SS 409/470ci 600 HP stroker project 1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs |
#17
|
|||
|
|||
Great information, I just sent a request for a quote on my hinges.
__________________
1971 Trans Am - Sold 1977 Can Am - Sold 2002 Trans Am Firehawk - Sold 2004 GTO - Sold 2006 GTO - Sold 1970 GTO - Sold 1972 Trans Am - Sold 1970 Trans Am - Current Project |
Reply |
|
|