[MPKind]

I'm looking for some sheet metal to patch in on my car. I need lower cowl pieces and rear outer wheel well patches (about the bottom 8 inches) for front and back of opening. I will post some detailed pics. These pieces area small enough to mail in a med sized box. It's just a matter of finding a donor car with an owner that will chop some of it up to sell.

Matt

[Racer81x]

I got several 65 and 66's out at my yard. Post a pic of the areas you are needing and i'll see what I have

[63gpman]

Matt, I think you and I both need to bring some cutting tools and run down and see Racer at some point. He sent me some photos of lower qtrs that may or may not work, but there are some other small small cuts that I would like to get if able.

[Racer81x]

Originally Posted by 63gpman

Matt, I think you and I both need to bring some cutting tools and run down and see Racer at some point. He sent me some photos of lower qtrs that may or may not work, but there are some other small small cuts that I would like to get if able.

If you guys ever want to make a road trip down let me know, as long as theres no deep snow, as I don't have a plow or tractor out at my yard.
I currentlly have for 65's and 66's:
65 GP
2 65 bonny 2dr hardtops
66 Bonny convert
66 bonny 4dr hardtop
2 66 cat 4dr sedans
66 cat 4dr hardtop

[marxjunk]

i need a drivers 1/4 for a 2 dr bonnie..what part of iowa?

[Racer81x]

Originally Posted by marxjunk

i need a drivers 1/4 for a 2 dr bonnie..what part of iowa?

Both drivers quartesr on the 2dr bonnies are rusty. I'm located in NW Iowa, about 20 miles west of Fort Dodge.

[MPKind]

Originally Posted by Racer81x

I got several 65 and 66's out at my yard. Post a pic of the areas you are needing and i'll see what I have

I'll get some pics up in the next day or two. I have inlaws in Storm Lake and Estherville, so I could come down without it being a daytrip.

[Racer81x]

Originally Posted by MPKind

I'll get some pics up in the next day or two. I have inlaws in Storm Lake and Estherville, so I could come down without it being a daytrip.

I'm only 45 miles south east of storm lake, or 75 miles south of estherville.

[MPKind]

I'm still fishing for some patches. I took some closeup photos the other day to pinpoint exactly what I'm looking for. This is the front and rear of the right rear wheel opening.

In the first pic, I need a chunk of the wheel well...that dogleg piece.

For the second pic, I need the bulk of the outer lower wheel well that goes a couple inches above the trunk pan. I could piece it back together, but it'd be easier to graft a piece in.