FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
pump
Does anyone know the make and model of the small pump that Langer and others are using to push water thru the head form the modified water passages ??
thanks |
#2
|
||||
|
||||
nobody ???????
|
#3
|
||||
|
||||
Top secret I guess.
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
#4
|
||||
|
||||
|
#5
|
||||
|
||||
thank you
|
#6
|
||||
|
||||
How about buying a set of aluminum RA5 heads or find a set of Warp 6 heads and you won't need that $260 dollar pump.........and you will end up going quicker!
GTO George |
The Following User Says Thank You to GTOGEORGE For This Useful Post: | ||
#7
|
||||
|
||||
Lets see here - You have proclaimed the RA V head the head to beat befor it has even made noise on an engine -- and telling me that a head that has been "discontinued" by the manufacturer is what I should be looking for. I see something wrong with this picture. Yes the tiger has issues, poor design in the water jacket area. but in many ways it has been proven.
If and when I buy new heads -------------- the choice has been made. |
#8
|
||||
|
||||
Curt,
If you need any other information about this subject, just PM me. I'll share anything I've learned. This board is not the place for intelligent, helpful Q&A. Scott Quote:
|
The Following 8 Users Say Thank You to Scott Rex For This Useful Post: | ||
Reply |
|
|