FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
valve lock and retainer measurements
I have a set of locks and retainers but have no idea if they are 7 deg. or 10 deg. Can some one measure the od of a 10 deg. Lock and the id of a 10 deg. retainer for me?
Rich
__________________
68 Firebird 400, #16, xe274, street dominator, 850 DP, hooker headers, t400, 3500 stall, 3.73, 295/65 bfg drag radicals... best 13.27 @ 102.8, 1.90 60ft |
#2
|
||||
|
||||
You do not have a stock retainer to fit them into to check.A stock 11/32" reatiner will not accept a 10 degree lock.
Any other stock GM retainer other then BB chevy takes the same locks as the Pontiac does, as do many Fords that do not have 3/8" stem valves like the BB chevy.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
Reply |
|
|