[steve v]

Here's the switch, light corrosion on the steel part but the contacts & dimmer stat are fine.
if you don't find a nicer one just pm your address & I'll send it out.

[The Boss]

Thanks Steve, PM Sent

[The Boss]

Originally Posted by FASTASSBIRD

Well originally I was not sure you had received bumper brackets yet but I see you have removed them from the list. What other brackets do you need? Also I sent these pics to your email

Brain fade - I still need the large flat bar core support brackets!

Does the correct console for 73 have the cutout on the lower driver's side? That's what I have in the car now but I thought it was incorrect?

[FASTASSBIRD]

You got me on the console Chris. You know this isn't my territory. I'm first gen unless the parts come in package deals. Lol. Do you have a pic of the brackets you need? I think I might have em.

[Held for Ransom]

Originally Posted by The Boss

Brain fade - I still need the large flat bar core support brackets!

Chris, I should have a set. Let me look.

[Held for Ransom]

Looked at my early '74 too. It has the cutout in the consoles' lower DS.

[The Boss]

Mike, do you have the bolts for them too? How much?

I just looked at the Brewster 4spd on e-bay, it has the cutouts too - I was wrong.

[Held for Ransom]

I can find no bolts/hardware. Let me think about price, but shipping will probably double price.
Have you pulled the console? Is there an ink stamping on the bottom?

[steve v]

Boss, your pm box is full!

[The Boss]

Originally Posted by Held for Ransom

I can find no bolts/hardware. Let me think about price, but shipping will probably double price.
Have you pulled the console? Is there an ink stamping on the bottom?

It's a repop console Mike that Steve put in there when he changed it over to a 4spd.

The console had a hole for a power window switch which I've put a switch into, but it doesn't go to anything. The real issue is when the carpet was cut it was a little generous and now shows an edge right where the console side cuts up. I can actually live with the console if it's the correct type, but the carpet will need to be taken care of.

No rush on the braces at this point - I think I have everything I'm going to have for the PY show, I could probably grab the braces from you at Norwalk.

[The Boss]

Originally Posted by steve v

Boss, your pm box is full!

Clear now Steve - you can always use thebosspontiac@hotmail.com

[The Boss]

Thanks for the headlight switch Steve, much appreciated!

[Dave73TA]

Hey Chris if your still looking for front black carpet I have a brand new one . In Conn Dave .