[mech-head]

Looking for a good endura bumper. Mine is flared out on one end, probably from being pushed into the fender for a long period of time. Something above driver quality is what I am looking to find.

I imagine shipping is probably brutal for these, but I would be willing to travel a decent distance. I also have relatives in Colorado, Chicago, and Baltimore that might be able to help with pick-up/delivery. I do plan on being at the POCI show in the Quad Cities, Iowa too.

Thanks,
Rick

[rare4k]

Have a good one in MD 20 mins from Baltimore 450.00

Sent from my XT1254 using Tapatalk

[mech-head]

PM sent

[mech-head]

Bump, still looking for a nice endura bumper.

[mech-head]

Bump, still hoping to find that gem of a bumper.

Thanks

[marxjunk]

make sure you get it all if you can in one shot..

the headlamp supports and the bumper brackets are really tuff to get a piece at a time..real tuff..and all 70 GTO only..they made a bunch of 70s so shouldnt be hard..you just have to patient and pounce when its available...

[mech-head]

Originally Posted by marxjunk

make sure you get it all if you can in one shot..

the headlamp supports and the bumper brackets are really tuff to get a piece at a time..real tuff..and all 70 GTO only..they made a bunch of 70s so shouldnt be hard..you just have to patient and pounce when its available...

Thanks Mark. I have all the brackets and supports on my current bumper. It is on the car, so I am not positive about their condition. So you have good advice about getting them if possible, just in case.

I have passed on a couple bumpers as my shop wants a really good example to start with. They are out there, but most have plenty of damage from the years. Finding the right one might take a while.

[marxjunk]

for some reason i think Chris..the Boss on here has one or two...may try to pm him..he may put you in the right direction