[wwbdsb]

Looking for information regarding the correct markings and their location. I have a 3:55 posi and an M-20 4 speed.
My research indicates there should be color markings in the outer end of each axle shaft and colors should be blue and green. Is this correct? No ideas as to the shade for these colors. Could find no info on drive shaft markings if any.

[tempest1964]

Take a look at this thread and see if it helps:
http://forums.maxperformanceinc.com/...ft+paint+marks

[bill ryder]

Or try this one, Will. "Bill"!

http://forums.maxperformanceinc.com/...ht=shaft+paint

[wwbdsb]

Hi Bill

Thanks for the info...guess I should just come to you first!

while I have you, what colors are the upper and lower pullys on a '64 w/o p/s and a/c?

Will

[bill ryder]

Will, crank pulleys engine blue. WP pulley 60 deg. black. "Bill"!

[wwbdsb]

Thanks