FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#221
|
|||
|
|||
Jim Genn on fb has one in NY Maybe Darrell Wheeler
__________________
Robin Triplett 2198020009 cell 63 Lemans convt. Present 63 Tempest HT bbw Parts car |
#222
|
|||
|
|||
1962 Tempest Wagon rear control arms
4 cyl auto, mine rusted through, looking for two good ones with little to no rust, not too far from central Virginia. Anyone?
please email gemiller@live.com Thanks, Greg
__________________
1970 Firebird 3200lbs - CVMS built, pump gas 461, 3.89 gear 29.5x10 inch tire,... 10.40 @ 129mph. Last edited by gem66; 07-07-2018 at 09:53 PM. Reason: add email |
#223
|
|||
|
|||
1962 Tempest Wagon rear control arms
Just to be clear, I am looking for rear control arms, not engine or trans. Thanks,
Greg
__________________
1970 Firebird 3200lbs - CVMS built, pump gas 461, 3.89 gear 29.5x10 inch tire,... 10.40 @ 129mph. |
#224
|
|||
|
|||
Quote:
__________________
Robin Triplett 2198020009 cell 63 Lemans convt. Present 63 Tempest HT bbw Parts car |
#225
|
|||
|
|||
63 Tempest or Tempest Lemans 326 PS Pump and two mounting brackets
Looking for the two piece mounting brackets for the 326 Power Steering pump and a pump or where to locate a remanufactured pump.
Brackets are those that locate to the drivers side head with three bolts. Need this timely. Thanks in advance! Jake M 310-962-2026 |
#226
|
|||
|
|||
Jake,might go on the Little Indians site and post a want ad also.Tom
|
#227
|
|||
|
|||
Will do now. Thanks Tom!
|
#228
|
|||
|
|||
63 Tempest V8 wagon auto drive train wanted
Have a friend that wants to swap his 326 3 speed stick setup for a auto so his wife can drive the car.PM please.Tom
|
#229
|
|||
|
|||
All set.
Thanks all. Jake |
#230
|
||||
|
||||
WTB
63 clutch and brake assembley, don't need the linkage as I am going hydraulic clutch.
|
#231
|
||||
|
||||
Need an amp gauge for my 63 tempest. Thanks Gary Beemer beemergary@hotmail.com
|
#232
|
||||
|
||||
Gary, I have one: $10 shipped.
John |
#233
|
|||
|
|||
63 Stainless Roof Drip Rail Trim
Any chance anyone has a straight 63 passenger side stainless roof drip rail trim piece to sell.
Someone put a screw through mine to hold it in place evidently. Ugh. Thanks. Jake in California |
#234
|
|||
|
|||
That would be stainless. Thanks.
|
#235
|
||||
|
||||
If it's stainless it can be repaired.
|
#236
|
|||
|
|||
How? Someone drilled a hole through it in a visible place.
Jake |
#237
|
|||
|
|||
Weld it shut, file and buff.
|
#238
|
|||
|
|||
Okay I will take it to a shop.
Thanks. |
#239
|
|||
|
|||
I need a vin tag and matching title for a ‘63 Tempest.
SD |
#240
|
|||
|
|||
Looking for 4bbl intake for 195 4-cylinder. Let me know what is available
|
Reply |
|
|