FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#81
|
||||
|
||||
Quote:
Trying to throw off AQ? |
#82
|
||||
|
||||
If bet it hooks on gravel too
|
#83
|
|||
|
|||
Probably a 326 with 2.73 gears and a 2 barrel.... I believe you Paul...lol my old 10 sec car used to beat 9 second cars too.... strange math isn't it...
|
#84
|
||||
|
||||
Quote:
|
#85
|
||||
|
||||
Last time I weighed my formula it weighed 3800 pounds without me and 4000 with me.
The only thing missing from the factory is the air conditioning compressor ,spare tire and jack.
__________________
74 Formula 469, 6X-4's, 72 Intake, Ramair Manifolds. 3 inch exhaust with x-pipe Custom Roller Cam, 1.52 Roller Rockers Quadrajet done by Cliff 3:42 gears 12.075 @ 112.70 12.092 @ 112.43 12.128 @ 111.71 Last edited by form74; 09-20-2018 at 08:24 AM. |
#86
|
||||
|
||||
When I first weighed my 74 Firebird it was 3960 without a roll bar or driver. It had iron heads two batteries and two bottles. Now I've widdled it down to around 3650 with a roll bar but no driver.
|
#87
|
||||
|
||||
So went out to tnt again sat, weather was similar to last time out, a tad cooler but more humidity, anyway track wasn’t near as good as last time since it rained from Tuesday thru Thursday night! Had a issue with my tach acting up so I couldn’t shift where I did two weeks ago, short shifting it, car basically ran same Et with worse 60ft n more mph! Very pleased with the outcome considering everything n less gear now.
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
#88
|
||||
|
||||
Quote:
With the tach screwed up were you able to see how much the rpm was reduced at the stripe? |
#89
|
||||
|
||||
Not Really, cause that's where it was screwing up the most when it got up around 6500, just start making jumps up damn near hitting 8 in second which obviously was then thinking i needed the rev limiter when it went past 7200, which the motor wasn't even close to that
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
Reply |
|
|