FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
1964 gto trunklid moulding clips
What do i use for stainless decklid moulding clips on 1964 gto.
|
#2
|
||||
|
||||
Took my old one in to a local part store and matched it up with one they carry for modern stuff
only problem was had to use different nuts. Been posted here before in the 64 section. Mine worked great.
__________________
64 Lemans hardtop 4spd, buckets |
#3
|
|||
|
|||
ejgoat
For 1964 Based on some of the older forum discussions, I evaluated some of the modern store bought clips and found them unsatisfactory in terms of replicating what was used originally. Give me your address and I'll ship you the installation kit. Just let me know what all you will need, ie: Pal nuts (6), blank studs (6), end screw mounting clips (2). Unfortunately I do not have 2 extra stainless steel Philip head screws used at the end of the molding, and you are on your own for those. Failure to use these two screws may result in the damage to your paint on the rear trunk panel. |
#4
|
||||
|
||||
Hi Jake. Glad you are back!!! You are a blessing......
"Bill"! |
#5
|
||||
|
||||
X2 on that Jake.
Tom Vaught
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#6
|
|||
|
|||
Ok great let me know how much, email me cookey430@aol very thankful for your reply
|
#7
|
|||
|
|||
ejgoat
For 1964 No cost. Just PM me your mailing address and what items you will need. |
#8
|
|||
|
|||
Bill,
My wife would love to tell you otherwise!! |
#9
|
|||
|
|||
Need everything but the two end pices
|
#10
|
|||
|
|||
Can i email you my address
|
#11
|
|||
|
|||
I think i should pay you for those things
|
#12
|
|||
|
|||
Aint gonna happen.
Just PM me your mailing address and I'll get these in the mail. It appears that you only need the 6 Pal nuts and the 6 studs. |
#13
|
|||
|
|||
50498 middleridge rd amherst,ohio 44001
|
#14
|
|||
|
|||
ejgoat,
Did you ever receive the stud/clips and Pal nuts? They were mailed out a couple of months ago, and you should have received them by now. |
Reply |
|
|