Inner cowl fitment on a 1970 GTO, I am fitting the inner cowl on the passenger side and it is 1/2" further out from center than the original passenger side. Is that correct for the passenger side? will the fender fit? or will I need to modify the part? I called AMES tech support and sent an e-mail to the tech support they recommended with no response. I also have a thread in the body work section
http://forums.maxperformanceinc.com/...90#post6171690
If no response I will eventually find a fender to fit test, but since the entire car is disassembled and I do not have a replacement fender yet I was hoping not to have to go there for this repair.