FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Reset TH400 kds
How do I reset TH400 kick down switch? It is on the accelerator pedal. Part #PZ00415 from OPGI. Thanks for great website
|
#2
|
||||
|
||||
If it operates as the stock switch, just push it forward in its bracket and then floor the gas pedal and the switch holder will ratchet to the proper position. You should be able to hear the clicks as it moves back the required amount.
__________________
Mick Batson 1967 original owner Tyro Blue/black top 4-speed HO GTO with all the original parts stored safely away -- 1965 2+2 survivor AC auto -- 1965 Catalina Safari Wagon. |
#3
|
|||
|
|||
Defective switch?
Maybe I have a defective switch, It acts like it was already set at midpoint. Bag was stapled shut. Just moves to 2nd half of travel, I need it to activate before mid point. I might try to post pictures.
|
#4
|
|||
|
|||
Here are pics.
|
#5
|
||||
|
||||
You need to pinch the slider and pull it out as far as you can to reset the switch.
It will adjust itself at next WOT. Hope this helps some. |
#6
|
|||
|
|||
Thanks Kenth
I knew there had to be a simple thing to release the slider. And I knew someone on here would know. Thanks again
|
Reply |
|
|