FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Some one to degree a cam
I am looking for some one or shop to degree my cam. I am located in NW Houston \ Tomball, TX area. Any suggestions?
__________________
|
#2
|
|||
|
|||
Are you assembling the engine yourself? I bought the tools, and degreed my own cam. I used YouTube videos to walk me through the process. My cam specs/crankshaft position checked out as advertised on the cam card. You can probably do it yourself.
__________________
1965 Pontiac GTO 455/469 w/ #48 Heads, '65 Tri-Power 9.25:1 CR Stump Puller Cam Muncie M22W 1st-2.56 2nd-1.75 3rd-1.37 4th-1.00 3.55 Rear Differential Front: 225/60R15 Height: 25.6" Rear: 275/60R15 Height: 28" |
#3
|
||||
|
||||
Yes, I am assembling the engine my self. I just didn't want to buy the degree wheel and dial guage for probably single time use.
__________________
|
#4
|
||||
|
||||
I decided to degree the cam myself and ordered the tools.
__________________
|
Reply |
|
|