FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
carb to manifold gasket install
is there a side of the gaskets that go towards the carb? I thought the part no. side was toward the carbs but not sure. Thanks.
|
#2
|
||||
|
||||
Mine look the same on both sides, makes no difference. Are yours different?
__________________
Chris D 69 GTO Liberty Blue/dark blue 467, 850 Holley, T2, Edelbrock Dport 310cfm w Ram Air manifolds, HFT 245/251D .561/.594L, T400, 9" w 3.50s 3905lbs 11.59@ 114, 1.57/ 60' |
#3
|
|||
|
|||
On the end carb gaskets no. 60113 there seems like an indented design around the holes on the side of the part no. They were on the car when I got it. I have new ones coming today I will see what they look like.
|
#4
|
||||
|
||||
As long as the side with the #60113 is between the rear studs, all is fine.
#īs towards carb or intake does not matter. |
#5
|
|||
|
|||
carb gaskets
The new gaskets arrived today. Flat on both sides so it doesn't matter. The old gaskets must be originals much better quality. No part no. on new gaskets. Thanks for your help.
|
Reply |
|
|