FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Ram air lower pan and Holley carb
Does any known if you can use a metal reproduction ra3 lower ram air pan with a Holley carb with vacuum secondaries without modifying the pan?
If not what mods are needed? Thanks |
#2
|
|||
|
|||
I have been using on my 69 bird,TA hood with no issue
|
#3
|
||||
|
||||
Believe some have dimples for the Holley float adjuster screws and some do not.
__________________
Happiness is just a turbocharger away! 960 HP @ 11 psi, 9.70 at 146. Iron heads, iron stock 2 bolt block , stock crank, 9 years haven't even changed a spark plug! selling turbos and turbo related parts since 2005! |
#4
|
|||
|
|||
Thanks for the feedback.
|
#5
|
||||
|
||||
Yes two versions exist for the Ram Air -4- pans for fitting a holley. But doublecheck for a Ram Air 3 pan as I do not know if the dimples were ever offered on them. Maybe Tom S can post pics of his set up that clears.....
|
#6
|
|||
|
|||
Mine is a PartsPlace RAIV first gen lower pan.Will shoot a pic of carb side.Tom
|
#7
|
||||
|
||||
Yes. But he had asked about Ram Air THREE....
|
#8
|
|||
|
|||
I don’t have a 3 lower pan,from the parts place picture I can’t tell if it has the dimples to clear the Holley .Tom
|
#9
|
|||
|
|||
The metal reproduction ra3 lower ram air pan will clear a Holley carb with vacuum secondaries without modifications.
Thanks for the insight. |
Reply |
|
|