FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
![]()
Is that still available, if so from whom?
I'd like to see if they still make any new ones as i'd like to swap to the higher flowing SBC water pump. |
#2
|
||||
|
||||
![]()
Yes. It’s been discussed here before but I forget who is making them. I’m sure someone else will know.
__________________
" Darksiders Rule "
|
#3
|
||||
|
||||
![]()
What is the benefit?
|
#4
|
|||
|
|||
![]()
Looks like the benefits would be:
SBC water pumps are much more common than Ponchos. And especially if you wanted to run an electric pump. No more divider plate to clearance. Last but not least: removable plate to access cam/timing set without breaking your oil pan seal.
__________________
67 LeMans, 326, M20, 3.31 12 Bolt |
The Following 3 Users Say Thank You to Joe-Touring For This Useful Post: | ||
#5
|
||||
|
||||
![]()
Jon Gunter Bayside Billet makes cover for sbc water pump
__________________
2008KRE Q16 Winner 2014 atco raceway doorslammer winner 86 grand am tube car 8.95 @152 455 eheads solid flat tappet cam Hoffman Racing building and racing Pontiacs for 35 years |
The Following User Says Thank You to Richie Hoffman For This Useful Post: | ||
#6
|
|||
|
|||
![]()
thanks Richie, i will have to check them out
one reason i want one is if i change the cam (or build another engine), i'm going to want to replace the timing cover and i really want the additional flow of the higher flowing Meziere pump |
#7
|
|||
|
|||
![]()
The only downside to those front cover is their pretty heavy. I run those too but I have mine modified so I can change timing on my cam gear without removing the front section and redoing the seal.
|
Reply |
|
|