FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Ram Air Cable position
Can someone post a photo of exactly where the ram air pull cable exits the firewall. I know it is below the windshield wiper motor, but exactly where. I see several dimples. Thanks.
Jim |
#2
|
||||
|
||||
I literally just did this last night. The dimple is there but a little hard to see. I'll post a pic.
I found it by looking at the firewall dimple locations that was posted some time ago out of the service manual.
__________________
1967 GTO 416 5-spd streetcar 11's on HP low 10's 150 shot 1965 GTO 10-71 Littlefield high-helix retro/Bird (untuned) 8.44 @164 3500+lbs 10.5W's SOLD! 1964 421 GP-Sold 6.0 cert. Fiat bodied altered blown alcohol Pontiac IAII-Sold |
#3
|
||||
|
||||
Here ya go...I'd like to know what the hole between the harness clip and the throttle cable is for
Hope this helps. Used a 27/64 bit and the grommet fit perfect. BTW, I messaged you a while back about a console you had for sale
__________________
1967 GTO 416 5-spd streetcar 11's on HP low 10's 150 shot 1965 GTO 10-71 Littlefield high-helix retro/Bird (untuned) 8.44 @164 3500+lbs 10.5W's SOLD! 1964 421 GP-Sold 6.0 cert. Fiat bodied altered blown alcohol Pontiac IAII-Sold |
#4
|
||||
|
||||
Used a 27/64 bit and the grommet fit perfect.
BTW, I messaged you a while back about a console you had for sale
__________________
1967 GTO 416 5-spd streetcar 11's on HP low 10's 150 shot 1965 GTO 10-71 Littlefield high-helix retro/Bird (untuned) 8.44 @164 3500+lbs 10.5W's SOLD! 1964 421 GP-Sold 6.0 cert. Fiat bodied altered blown alcohol Pontiac IAII-Sold |
#5
|
|||
|
|||
Perfect. What page in the service manual was that? It's too small to read and when I enlarge it, the image is too blurry. Is that the Fisher Body Service manual?
I have the same square hole. It must be used for something but I don't know what. I'll PM you abouth the consoles. I have two 4-speed consoles but they are in rough shape. Thanks. |
#6
|
||||
|
||||
Here are pics from the assembly manual:
|
#7
|
|||
|
|||
I don't think my PM's are going through. You can have one or both consoles for the cost of shipping.
|
#8
|
||||
|
||||
I'm not getting notifications for some reason or I would have answered sooner. Looks like you got the info though. Thanks for the better pictures the bracket was a pain to do in the car bits its perfect.
__________________
1967 GTO 416 5-spd streetcar 11's on HP low 10's 150 shot 1965 GTO 10-71 Littlefield high-helix retro/Bird (untuned) 8.44 @164 3500+lbs 10.5W's SOLD! 1964 421 GP-Sold 6.0 cert. Fiat bodied altered blown alcohol Pontiac IAII-Sold |
#9
|
|||
|
|||
Grommet and cable in place. I was looking in the wrong area. Thanks.
|
Reply |
|
|