FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#41
|
||||
|
||||
Quote:
didn't forget about you. Got my hip replaced last week, so i have been laid up! The gauges on the right side were installed by me after the heat was gutted. I found the prism paper in a hobby shop years ago, closest I could come to the engine turned. I believe the Radio area is stock, the face of the radio came through the opening with no engine turned on any of the ones I've seen. My current 74 has the engine turned dash, but is put away till spring so I can't check. JOHN
__________________
74 GTO 406 T400 74 Firebird 350 4-speed 68 GTO Convertible 400 T400 76 GP LJ 400 4BBL T400 78 Chevy 1/2 Ton Truck Oh yea I love my wife very much For some reason it got erased when I put it here last time!!!!!! hmmmmmmmm |
#42
|
|||
|
|||
Hi John,
I hope you mend quickly and are out and about in no time. I'm getting a quote from F&M Metals in Nebraska that specializes in engined turned dashes for cars. I sent them the old dash bezel and your picture of engine turned dash for reference. If anyone is interested in having them make more than one set just for me, let me know. Dennis |
#43
|
||||
|
||||
Interested. I would want 2 possibly, depending on cost.
__________________
74 GTO Bracket/Street car and another 74 for the wifey to race with! 70 GTO 400, 4 spd, #'s matching and a little to nice for me to own. Friendship is like peeing your pants..everyone can see it but only you can feel the warmth! |
#44
|
|||
|
|||
Rob B,
You bet. I will post what it costs and maybe be able to get a discount for a multiple order. Any body else interested? Dennis |
#45
|
|||
|
|||
New Carpet Going In
Dan was busy today test fitting and trimming the new black cut pile carpet. It's looking really nice the the carpet was well made (ACC) and molded to all the humps and bumps with more than enough material for trimming off.
Dennis |
#46
|
|||
|
|||
Rob B & 74gto,,
I found out that Ames sells the 4 piece engine turned dash inserts for $129.00 and they are in stock, so I pulled the plug on getting them fabricated with a custom metal place. It would be twice the price at least of what Ames sells them for. Thanks, Dennis |
#47
|
||||
|
||||
Rob B,
I also have one of those style dashes and the engine turned inserts were in bad shape. Just some info for you guys. You can purchase the material for the inserts in a small roll or sheets and cut them out yourself. I also saw on ebay the set already cut for $50 bucks. I decided to buy the sheets enough to do 2 sets. I just wanted to pass on that info $130 is a bit too much for the inserts. All I have to do now is make a stencil and i'm rocking and rolling all for $19.99. I made my purchase off Amazon... Cya Terry |
#48
|
|||
|
|||
a95toy,
That's a good idea. How are you going to cut the aluminum sheet without distorting the edges? I'm not a metal worker, so very green at this sort of thing. $50 a set is alot better than $129.00 especially if they are cut well with true edges. Dennis |
#49
|
||||
|
||||
metal cutting
I'm making a stencil that will cut exact out of thin metal. Put my machine shop skills from way back to use LOL... I bought the whole roll for 30 bucks if I have any left over I will post to you guys.. I should have more than enough for my two dash's. I saw the ebay one for $50 but i thought i would give it a shot plus if my stencil doesn't work out I may have access to a laser cutter... Let me know if you guys are interested.
I can still purchase more of the material.... cya Terry |
#50
|
||||
|
||||
inserts
Guys,
Sorry i should have been more clear on the $19.99 this is a sheet not a roll but the sheet is large enough to make 2 sets out of. I bought the $29.99 roll. Sorry i wasn't clear with that LOL... Terry |
#51
|
|||
|
|||
a95toy,
How big is the sheet and what thickness? I assume the whole sheet is already engine turned. I'd be interested in at set. What are you thinking it will cost? Thanks, Dennis |
#52
|
||||
|
||||
sheet
Dennis,
There are several different sizes I found. There are even 2 types of engine turn patterns. It really is up to the person who is buying it. I found at least 5 different sizes to the sheets. As far as thickness it was the same as the one i have on my dash. Not sure what the actual thickness is until i get my new digital calipers in I ordered but I can check once the weather co-operates here. I just saw all the ones selling online and the prices and I decided I wasn't going to pay those prices and I figure you guys feel the same.. Once i make the stencil and figure out if it will look right when cut I'll let you guys know. If I have to use the laser cutter that will be the price on what it cost me. If the stencil comes out right on then of course I'll share with you guys if I have any left over and it will be mostly the cost of material. I have just been waiting for the weather to warm up a bit before i start the project...I will keep you guys in the loop. Don't want to see anyone paying those outrageous prices to spiff up the dash. I am still looking for a dash updates for mine so if you guys have any extra gauges or even console parts keep me in mind... Terry |
#53
|
||||
|
||||
sheet
Dennis
I'm sorry yes the whole sheet is engine turned. Just look it up on Amazon I think they still sell it by the sheet or roll... Terry |
#54
|
|||
|
|||
Terry,
That sounds great. I can wait for the inserts whenever you get to it. I do have an extra set of console gauges that I may consider selling/trading. They are very nice originals, but I don'e know if they work since they aren't in the car yet. I may have an extra console too. I'll check and let yoou know. Dennis |
#55
|
||||
|
||||
sheets
Dennis,
That sounds great. I do alot of electrical car stuff even if you don't have a extra set I can get them working for ya.... I have 2 consoles at the moment just no console gauges as of yet... I thought about the aftmarket one's not sure I want to finish this motor first then I'll see. You wouldn't happen to have or know someone with a mega brace setup would you????? That is the last part I need to start my motor build... I have a bunch of extra parts 2 cams springs and a set of the cam saver lifters as well 2 sets of pistons. Speed Pro with rings and JE bushed 4cc domed. I'll be getting rid of these soon.... thanks I will let you know when i get them done.... Terry |
#56
|
||||
|
||||
metal cutting
Hey guys,
Found out these sign shops that sell metal or metallic signs may have the laser cutter i'm looking for. Now just have to trace them out on the sheet. Not sure what it is going to cost but will keep you guys in the loop... cya Terry |
#57
|
||||
|
||||
Sorry for the wait everyone still trying to find a stencil or a set I can use to make the new one's.
Terry |
#58
|
||||
|
||||
Maybe Dennis could take some cardboard and make patterns of all four pieces before he applies them to his insert, and mail them to you???
__________________
74 GTO 406 T400 74 Firebird 350 4-speed 68 GTO Convertible 400 T400 76 GP LJ 400 4BBL T400 78 Chevy 1/2 Ton Truck Oh yea I love my wife very much For some reason it got erased when I put it here last time!!!!!! hmmmmmmmm |
#59
|
||||
|
||||
sounds like a plan.... I have an old bezel but I'll have to dig it out to try to make a stencil but if anyone has a carboard setup that would be great...
Terry |
#60
|
|||
|
|||
Terry & John,
I've been focusing on getting my '71 Formula ready for paint the past month, so now that is finished (for now) I can go back to the '74 GTO. I bought a new dash insert from Classic Industries and though it looks really nice, we discovered that the cut out for the steering column is cut higher than the original by 3/4". There is quite a gap there now and this affects the engine turned inserts where they curve around either side of the steering column. I'd have to have a custom set made to fit, or at least do some carefull trimming. I could make stencils from the original dash insert and send them to you. Or, better yet, when I get the repop set, send them your way to use as patterns. Anyone ever install or use the dash insert from Classic? Dennis |
Reply |
|
|