[ponchjoe]

Sorry Jim. I must have mis-understood your shipping to the west coast post. I thought it read you had 32 feet availalble from NY to the west coast. Indiana is right on the way isn't it? Maybe you were looking to haul a full trailer to the west coast?

Thanks,
Joe

[Ragtop Man]

Any plans to go thru Canada in your future? Or down South?

[Trulyvintage]

Originally Posted by Ragtop Man

Any plans to go thru Canada in your future? Or down South?

Please PM me with specifics
I do not transport in or out of Canada


Jim

[Trulyvintage]

January 1st

Pontiac vehicle transport

17 feet with 5500 pound capacity available from
Montrose, MO 64770 to Culdesac, ID 83524

Here is my route @ http://mapq.st/9-iHKvNrYB

I can continue from Culdesac, ID 83524 to Washington or Oregon ........


Jim
(260) 804-6695

[Traker82]

Any where in Newark NJ. I need something brought up from there

[Trulyvintage]

Originally Posted by Traker82

Any where in Newark NJ. I need something brought up from there

I left the Bronx, NY on Sunday afternoon ...
I am in Pennsylvania now heading west to Missouri
with room only for parts.

It is always best to call me,


Jim
(260) 804-6695

[Trulyvintage]

December 26th

17 feet of vehicle transport space available

Montrose, MO 64770 to Culdesac, ID 83524

My route @ http://mapq.st/gNOurj

Then

34 feet of vehicle transport space available

Culdesac, ID 83524 to Rochester, WA 98579

My route @ http://mapq.st/geBCLI

Then

17 feet of vehicle transport space available

Rochester, WA 98579 to Ballwin, MO 63021

My route @ http://mapq.st/fun8Gu



Jim
(260) 804-6695

[Trulyvintage]

December 27th

Leaving this morning from St. Joseph, MO 64507

Space is still available


Jim
(260) 804-6695

[Trulyvintage]

January 1st

17 feet of vehicle transport space available
Salt Lake City, UT to Culdesac, ID 83524

My route @ http://mapq.st/fauHm8

Then

34 feet of vehicle transport space available
Culdesac, ID 83524 to Rochester, WA 98579

My route @ http://mapq.st/geBCLI

Then

17 feet of vehicle transport space available
Rochester, WA 98579 to Ballwin, MO 63021

My route @ http://mapq.st/fun8Gu


Jim
(260) 804-6695

[Trulyvintage]

January 4th

17 feet w/ 5500 pound capacity available
for Pontiac transport from Salt Lake City, UT
up to Culdesac, ID 83524

My route @ http://classic.mapquest.com/mq/1-MAPYJnG_UEQg

Continuing from Culdesac, ID 83524 to Rochester, WA 98579
with 34 feet & 10,000 pound capacity available for Pontiac hauling

My route @ http://classic.mapquest.com/mq/9-Hw8W


Jim
(260) 804-6695

[fiedlerh]

If you ever go from the NW Chicago suburbs to the Ossining, NY area, lt me know.
May need a car delivered if the poetntial buyer comes through. Need about 20 ft of room.

[Trulyvintage]

Originally Posted by fiedlerh

If you ever go from the NW Chicago suburbs to the Ossining, NY area, lt me know.
May need a car delivered if the poetntial buyer comes through. Need about 20 ft of room.

Thanks,

But all the transport I do is custom
I post here when I have available space on specific trips
I plan trips in advance based on confirmed transport


Jim

[ryan389]

HI
Just wondering if you can pick up a block (bare) in Salina Kansas to lower Connecticut.
THANKS!

[Trulyvintage]

Originally Posted by ryan389

HI
Just wondering if you can pick up a block (bare) in Salina Kansas to lower Connecticut.
THANKS!

Sorry,

I am not traveling that route


Jim

[Trulyvintage]

January 4th

Leaving Twin Falls, ID in the morning


Jim
(260) 804-6685

[Trulyvintage]

January 10th

Vehicle transport

I will be leaving Rochester, WA for Missouri
I can route down I-5 along the West Coast

I will have 17 feet of room available
with 5500 pound capacity for vehicle transport

I can continue east from Missouri to the East Coast
from Washington - Oregon - California for vehicle transport



Jim
(260) 804-6695

[Trulyvintage]

January 7th

17 feet w/ 5500 pound capacity available
for vehicle transport from
Rochester, WA 98579 to Rapid City, SD 57701

My route @ http://mapq.st/e3iHzq



Jim
(260) 804-6695

[b-man]

Jim,

I have a bare Pontiac engine block, crank, pair of cylinder heads and a box of misc. engine parts that are now in Woodland WA 98674 and need to go to Canyon Country CA 91387 sometime within the next few months.

Please let me know if and when you might be heading that way, by private message if you like.

Thanks, Bart

[Trulyvintage]

Originally Posted by b-man

Jim,

I have a bare Pontiac engine block, crank, pair of cylinder heads and a box of misc. engine parts that are now in Woodland WA 98674 and need to go to Canyon Country CA 91387 sometime within the next few months.

Please let me know if and when you might be heading that way, by private message if you like.

Thanks, Bart

Bart,

Keep an eye on my route ...
I have no upcomng trips planned for that run,
but you never know ...

Jim

[Trulyvintage]

January 17th

18 feet of transport space available
with 6000 pound capacity from
Ballwin, MO 63021 to Canal Winchester, OH 43110

My route @ http://mapq.st/fJA1nZ

Jim
(260) 804-6695