FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
FS 4 barrel air cleaner
Factory 4-barrel air cleaner in excellent condition with no dents or rust pitting. These make a great high-performance air cleaner, the air cleaner base has a smooth curved inlet shape unlike most drop-base aftermarket air cleaners. The large wide snorkel can be also hooked up to flex hose for a cold air setup. (included)
These air cleaners came on '73 and later cars, however they will fit on the earlier cars as well. $200 for everything including flex duct hose and attachment shipped, paypal accepted +3% Please send me a PM if you're interested, thanks. |
#2
|
|||
|
|||
any chance you can measure the amount of drop the base has? & looks like it doesnt have the indent to clear HEI distributors, was this on an HEI car to know it cleared? thanks.
|
#3
|
||||
|
||||
it will fit i tried it on mine and i have a MSD with a cap adapt
|
#4
|
|||
|
|||
ok thanks, just curious because the air cleaners on hei cars have a very noticeable indent to clear the big hei cap.
if you can measure the drop that would help me & possibly others determine if it will work for their car/hood clearance. |
#5
|
||||
|
||||
not sure what you mean
|
#6
|
|||
|
|||
The distance between where the air cleaner base sits on the carb to the very lowest point of the air cleaner base, the part closest to the intake manifold fyi
__________________
Build it Right Build it Once!!! Just another Engine Builder from the Northwest lol |
#7
|
||||
|
||||
i will measure but it does fit under a flat 66 tempest flat hood with a Holley 800 and 1" spacer on top of a Holley Street Dominator if that helps
|
#8
|
|||
|
|||
The last time I tried to post pictures, they didn’t post. If you don’t mind me jacking your thread, it gives me a chance to see what’s up with the failed picture posting, and it provides an example of the same breather on a 69 Firebird with a hei.
Notice the open-element option. The feds got wind of the quick-flip emission delete and passed a law that emission equipment must be manufactured so that it cannot be assembled incorrectly. |
#9
|
||||
|
||||
bump
|
#10
|
||||
|
||||
bump
|
#11
|
||||
|
||||
bump
|
#12
|
||||
|
||||
bump
|
#13
|
||||
|
||||
try again
|
#14
|
||||
|
||||
and again
|
#15
|
||||
|
||||
bump
|
#16
|
||||
|
||||
once more
|
#17
|
||||
|
||||
and again
|
#18
|
||||
|
||||
bump
|
#19
|
||||
|
||||
somebody anybody
|
#20
|
||||
|
||||
bump
|
Reply |
|
|