Reply
 
Thread Tools Display Modes
  #1  
Old 03-29-2011, 09:41 AM
F ROCK's Avatar
F ROCK F ROCK is offline
Ultimate Warrior
 
Join Date: Jun 2003
Location: sicklerville nj 08081
Posts: 1,938
Default decklid lock install?

71 lemans.
any tips on installing this with the shaft? been a while...
thanks to Andre for sending me out a shaft, i'd lost mine.

  #2  
Old 03-29-2011, 09:45 AM
Rob B's Avatar
Rob B Rob B is offline
Ultimate Warrior
 
Join Date: Mar 2002
Location: Lawrenceburg IN
Posts: 5,616
Default

Make sure you have the retainer clip in place before you put the lock cylinder thru the hole in the decklid is all I can think of otherwise pretty straight forward install.

__________________
74 GTO Bracket/Street car and another 74 for the wifey to race with!
70 GTO 400, 4 spd, #'s matching and a little to nice for me to own.
Friendship is like peeing your pants..everyone can see it but only you can feel the warmth!
  #3  
Old 03-30-2011, 07:48 AM
slowgto slowgto is offline
Ultimate Warrior
 
Join Date: Jul 2003
Location: Chalfont, PA
Posts: 1,003
Default

Put key in the lock so you know which way is up.
Hold the retaining clip in place so lock cylinder can pass through the hole in it.
Drop the lock cylinder in. (with gasket)
Push retaining clip in place. (this will take a few tries).
A small screw goes in the retaining clip.

On mine, the trunk hole was a little rough on the inside, so the slot in the lock cylinder was not reaching through enough for the clip to slide on. I put the cylinder in a vise and filed the slot larger. After that, the clip slid on.

  #4  
Old 03-30-2011, 02:06 PM
F ROCK's Avatar
F ROCK F ROCK is offline
Ultimate Warrior
 
Join Date: Jun 2003
Location: sicklerville nj 08081
Posts: 1,938
Default

got it in there, thanks guys.

  #5  
Old 04-13-2011, 04:29 AM
richmas5 richmas5 is offline
Chief Ponti-yacker
 
Join Date: Jan 2007
Location: northern nj
Posts: 556
Default

anyone ever repair the lock cylinder hole on the decklid,I have a nice one except someone drilled out the lock at one time,metal is a little messed up around the hole

  #6  
Old 04-13-2011, 09:07 PM
F ROCK's Avatar
F ROCK F ROCK is offline
Ultimate Warrior
 
Join Date: Jun 2003
Location: sicklerville nj 08081
Posts: 1,938
Default

Quote:
Originally Posted by richmas5 View Post
anyone ever repair the lock cylinder hole on the decklid,I have a nice one except someone drilled out the lock at one time,metal is a little messed up around the hole
do you mean the decklid is nice exept around the hole?

  #7  
Old 04-13-2011, 11:10 PM
richmas5 richmas5 is offline
Chief Ponti-yacker
 
Join Date: Jan 2007
Location: northern nj
Posts: 556
Default

yes,here is a pic I have attached
Attached Thumbnails
Click image for larger version

Name:	lid 1.jpg
Views:	118
Size:	39.0 KB
ID:	241120  

  #8  
Old 01-01-2020, 12:02 AM
gto406 gto406 is offline
Senior Chief
 
Join Date: Mar 2004
Location: Detroit MI
Posts: 300
Default

I managed to get my PYLock (trunk lock cylinder) and retainer (a repo part) into the lid and secured with a screw.

I have to turn the key all the way right to get the trunk lid to pop. Wondering if it is tight due to the repop’d retainer? It took quite a few tries to get the retainer holding the cylinder.

Any confirmation or additional tips always appreciated!

Thx,
Brian.

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:42 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017