[LATECH]

I have a 73 400 short block and heads. All from same engine. I pulled the heads and took it to the machine shop, and I haven't started anything with it yet.
It has never been opened up before and looks real good inside . It was a running engine pulled several years ago. It still turns over, just has very light rust beginning in the a few cylinders. It would probably clean up at .010 with no trouble.
Casting number 481988
Heads are 4X-7 and I have CCed them.They are 98 CC chambers.
This motor had good antifreeze running out when I picked it, and is pretty clean inside.
I was going to build a stroker with it which would be real ideal with the 98 CC heads made for unleaded gas.(Had 4 bbl. EGR intake on it too)
Sale is for heads and assembled used short block. No pan, valley pan or intake etc. I do have timing cover and balancer to go with it as well as the head bolts and miscellaneous bolts if needed. It was a 4 barrel engine. I don't have the block code handy, but I will post It in a few days
Asking $ 950.Negotiable.
PM me , Or E mail me at lascantech@aol.com
Located in Northeast Pennsylvania 17765 zip code
This motor would run if just re assembled , but is sold as an exceptional core for the sole purpose of rebuilding.

[LATECH]

still available.

[LATECH]

Bump

[LATECH]

Bump

[LATECH]

Bump. Still have this 73 400 engine complete. Unmolested. I took the heads off, and removed timing cover as I was going to take it to the machine shop.
As stated this was a running engine when I got it to use as a buildable core.
Never been disassembled