 |
|
| Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
| Reply |
|
|
Thread Tools | Display Modes |
|
#1
08-26-2009, 02:59 PM
|
|||
|
|||
Coolant plugs are ready!
i HAVE MADE 2 SETS OF THE COOLANT PLUGS THAT GO INTO BACK OF THE HEADS IF YOU WANT TO RUN LINES UP TO THE CROSSOVER. Please if your not accepting emails don,t bother e-mailing me. Price are still 20.00$ plus shipping. Let me know if your interetsed.
|
|
#2
08-26-2009, 04:18 PM
|
|||
|
|||
|
I'll take another set
 I'd probably even take two sets, if available can paypal with alacrity
__________________
Clay Marsh 1967 GTO convertible Twin Turbo 5spd project  http://forums.performanceyears.com/f...d.php?t=618281 http://www.youtube.com/watch?v=eJ9KworCMRE Last edited by baron_; 08-26-2009 at 04:29 PM. |
|
#3
08-26-2009, 05:42 PM
|
|||
|
|||
|
Baron, we can do this, i need 2 days to get another set done, during this time you can mail me a money order. ok??
|
|
#4
08-26-2009, 05:44 PM
|
|||
|
|||
|
sure
No hurry, but I need to get to the post office anyway these are just going on the shelf Your last ones worked so well, I'll probably install 'em on every engine i build
__________________
Clay Marsh 1967 GTO convertible Twin Turbo 5spd project http://forums.performanceyears.com/f...d.php?t=618281 http://www.youtube.com/watch?v=eJ9KworCMRE |
|
#5
08-26-2009, 05:52 PM
|
|||
|
|||
|
Thank You sir, for the kind words, makes me fill good knowing im helping, Taking some dimensions on a bare block for some screw in soft plugs, hummmmmmm This will be fun!!
|
|
#6
08-28-2009, 10:39 AM
|
||||
|
||||
|
How about screw in plugs for KRE D ports, 3/4 inch pipe wth 3/8 inch pipe center?
__________________
Its ok to giggle and snicker, Dont laugh and point |
|
#7
08-28-2009, 10:41 AM
|
||||
|
||||
Can you post some pictures of these plugs?
|
|
#8
08-28-2009, 12:06 PM
|
||||
|
||||
|
I purchased a set from 67cruiser, they were shipped in a jiffy and worked great.
__________________
1970 Lemans Sport, PPR 383/4spd. |
|
#9
08-29-2009, 06:23 AM
|
|||
|
|||
|
PM sent!
|
|
#10
08-29-2009, 10:11 AM
|
|||
|
|||
|
Ollie, whats the length?? ill look into it, no promises, not really fimiliar with those heads and there set-up.
|
|
#11
08-29-2009, 12:59 PM
|
||||
|
||||
|
Thanks for Your reply to my PM.
After some more research I found Earl's sells the 3/4x3/8 inch bushing. Attach photos are of the bushings and the cross over I fabricated
__________________
Its ok to giggle and snicker, Dont laugh and point |
|
#12
09-03-2009, 03:50 PM
|
|||
|
|||
|
Looks like 3 sets are left, went fast, Thanks to all the Pontiac guys who tryed them, Everyone is pleased, please enjoy.
|
|
#13
09-05-2009, 11:33 AM
|
||||
|
||||
|
Quote:
__________________
************************************* 463 SRP .035 Pistons, Eagle rods, N crank, Pump gas, Victor intake, Holley 850BT carb, 6H heads,TH400 w/T-Break, Continental custom 3500 converter, 3.73 gears. TV7101 TURBO! 
|
|
#14
09-05-2009, 01:45 PM
|
|||
|
|||
|
Just recieved a e-mail from a local Pont. street -drag racer, Rich, before i installed the coolant plugs i was running 210 to 215 on the temp. after installation, i ran my lines up to the crossover, motor is now running 190 all day, Many Thanks, BIG AL!!!!
|
|
#15
09-05-2009, 03:24 PM
|
||||
|
||||
|
Do these just press in?
|
|
#16
09-05-2009, 03:55 PM
|
|||
|
|||
|
Yes they are .004 tight
|
|
#17
09-05-2009, 05:52 PM
|
||||
|
||||
|
Thanks for the Earl's Info. Don't run Iron Heads anymore so the screw-in deals are required.
Tom Vaught
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
|
#18
09-15-2009, 11:59 PM
|
|||
|
|||
|
67cruiser, I pm'd you.
Need to know where to send the money and how. Thanks. Shawn. |
|
#19
09-17-2009, 04:20 PM
|
|||
|
|||
|
Special Thanks to all the Pontiac guys or gals who bought and wanted to try a set of my coolant plugs for the rear of the cast heads, i made 6 sets and they went fast, everyone who bought em emailed me with praise and thanks. I told all they were going fast and that i had no control over costs of aluminum and electric to run a lathe going up. So once again my thanks to you all. Need a set now, let me know for i will only be making them as needed. Rich
|
|
#20
09-17-2009, 06:14 PM
|
||||
|
||||
coolant plugs
67 Cruiser
pm sent Thanks, Ron
__________________
Another Red Light Nightmare 1966 Martinique Bronze 2+2 428 tri-power auto, black top & bucket seat interior, pass recliner, ATC, Cruise, AM FM, Reverb, Wood wheel, tilt, ps, pb, pw  1966 Catalina, Barrier blue with a white vinyl top, tilt, AC, ps, pb, bucket seats with console 68 428 4 bolt, 4 speed M20 and a 66 tri-power project. Semper Fi |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
