FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
for Nicks67GTO and others
Hear is a picture of the bolt holes on the Drivers Side cylinder head for some stock Pontiac heads and also Edelbrock E-Heads. This is for future conversations in the Street Forum
The holes would be numbered: Bolt hole (Top left of head) = #1 Bolt Hole (Top left of Head Core Plug) = #2 Bolt Hole (Bottom left of Head Core Plug) = #3 Bolt Hole (Bottom Right of Head Core Plug) = #4 Bolt Hole (Bottom left of Head close to head gasket) = #5 Bolt Hole (Bottom right of Head close to head gasket and exhaust gasket ) = #6 Tom V. Call me Nick
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. Last edited by Tom Vaught; 02-28-2021 at 04:19 PM. |
#2
|
||||
|
||||
Glad to help you out Nicks67GTO gen 2 Power Steering project.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
Reply |
Thread Tools | |
Display Modes | |
|
|