FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
E-Head plumbing
Has anyone plumbed E-Heads from both sides to the water crossover and incorporated the heater also?
If so, would they be willing to share pictures and/or secrets to the modification? The nipples that are included with the heads are brass and surely (I'm guessing) not what is used. What's best, hard tubing or flex hoses? |
#2
|
||||
|
||||
Plumbing E Heads
This is my set up.
It is installed on a set of stock 7K3 heads. the same set up will work on a set of after market heads using the 3/4 x 3/8 bushing . The part that screws in to the head is called a bushing it is 3/4x3/8 inch npt. This part is an Earl's. Sorry The photo of the cross over does not enlarge. When installed the cross over loops forward and down under the distributor. I don't have a photo of that either.
__________________
Its ok to giggle and snicker, Dont laugh and point Last edited by Ollie; 04-22-2011 at 10:39 PM. |
Reply |
|
|