FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
8.2 pontiac pieces
Looking for an 8.2 pontiac rear end cover. I know they are reproduced, but would like a nice original. I already have one extremely pitted, so looking for a better one.
Could also use one rear cover mounting bolt, but will take a set of 10 if one doesn't want to break up a set. Yes, I know these are repro'd too, but looking for originals. Not too pitted. Looking for a set of eight of the T bolts and nuts which hold the axle shafts to the housing. Thanks, Chris
__________________
http://gloryrestoparts.20megsfree.com/ 1970.5 Pontiac Tempest GT-37 400ci 4bbl 4sp 3.90:1 12.73 @ 112.42 2011 Pure Stock Drags 12.71 @ 110.58 2013 Martin FAST/FS race 12.70 @ 111.74 2014 Pure Stock Drags 12.60 @ 111.66 2015 Martin FAST/FS race 1968 Pontiac Firebird 400 TH400/3.08 open export car - factory heater delete 14.48 @ 95.86 w/ 2.14 60' 2018 Pure Stock Drags 14.47 @ 95.02 w/ 2.16 60' 2019 Martin FAST/FS race |
#2
|
||||
|
||||
I have bolts, I’ll have to look at the covers
Teri 847346638 Sent from my iPhone using Tapatalk |
#3
|
||||
|
||||
Thanks Teri. I already located parts
__________________
http://gloryrestoparts.20megsfree.com/ 1970.5 Pontiac Tempest GT-37 400ci 4bbl 4sp 3.90:1 12.73 @ 112.42 2011 Pure Stock Drags 12.71 @ 110.58 2013 Martin FAST/FS race 12.70 @ 111.74 2014 Pure Stock Drags 12.60 @ 111.66 2015 Martin FAST/FS race 1968 Pontiac Firebird 400 TH400/3.08 open export car - factory heater delete 14.48 @ 95.86 w/ 2.14 60' 2018 Pure Stock Drags 14.47 @ 95.02 w/ 2.16 60' 2019 Martin FAST/FS race |
Reply |
Thread Tools | |
Display Modes | |
|
|