[grnmnstr]

1972 Pontiac Ventura Street/Strip

455, Stock block
Edelbrock Heads, 72 cc
Stud Girdle
Harland Sharp Rockers
Victor Intake
950 Dominator
Holley regulator
Meziere water pump
Alternator
Aluminum radiator with dual fans
HEI with new MSD wires
MSD 6AL
5” Recall tach
B&M Pro Stick shifter with Line Loc
Headers, 3” Flowmasters
TCI Midplate/Flexplate Shield
New ATI Flexplate
New RobbMc starter
New steering box
TH400 (just rebuilt) Reverse Manual valve body with transbrake
9” Converter
B&M transcooler with thermostatically controlled fan
SS Braided cooler lines
New Interstate battery relocated to trunk
Fuel cell with sending unit in trunk
8 point cage with easy access for driver
New RCI harness, expires 12/20
Narrowed 12 bolt, tubbed, Moser axles, Perfect Launch Aluminum rear end cover
Ladder bars with new heim joints and hardware
Mickey Thompson Sportsman Rears 33-21.5-15, Weld Drag Stars15x15s
Mickey Thompson Sportsman Front runners with Weld Drag Stars
New Afco Double Adjustable Shocks, 150# springs
Nice interior, new door panels, new headliner, new carpet, racing buckets
New hinge pins installed on doors
Body is in very good shape
95% ready for track or drive on the street as is

We just spent $3,000 at Farks Supercars in NJ, with the new shocks/springs, new crossmember, ladder bar hardware, set pinion angle, set ride height, chassis squared, front end aligned

$25,000 turn key or best cash offer

[chiefbigb]

Could it be sold as a roller as well or just turn key?

[grnmnstr]

Preferably turn key.

But I am open to other offers

[71 T/A]

What cam does the motor have?

[grnmnstr]

To be honest, I have no idea.
As you can see, there is very little description of the motor. It came with the car and I'm not sure on the internals.

[grnmnstr]

OK, I snapped a few more pics.

Found out some info on motor
455 + .030 over = 462"
Howard's Cam Solid Roller .720" lift
10.5 Compression
KB Icon forged pistons, Flat Top
RPM H beam rods
Edelbrock heads flow 330 cfm

Car has a clean NY title

[grnmnstr]

Happy New Year.............for somebody??

Ran low 12s in November. Tires have flat spots from sitting (before we bought it). Could not really run it all out.
Timing is set at only 30 degrees. Easy low 11 potential.

Car is currently in heated garage. You can come buy and look at it at any time. Take it for a ride.

We are in the process of building a 10.0 car and do not have the time and/or space to use this one.

Price reduced to $24k or best offer.

[grnmnstr]

I have video for anybody that is seriously interested.

Thanks

[grnmnstr]

Bump

[slowbird]

Weight? How many gal is fuel cell?

[grnmnstr]

Never got a chance to weigh it. It is all steel, but narrowed. I would guess maybe 3500.

Fuel cell is 12 - 16 gallon.

[grnmnstr]

Bump. Racing season is here.

[grnmnstr]

TTT

[grnmnstr]

ttt

[grnmnstr]

For those in the New England area, the car will be at the following cars shows:

Sept 8 - Newtown, CT car show
Sept 29 - Wallingford, CT POCI car show

Thanks

[grnmnstr]

Open to all reasonable offers

[grnmnstr]

Price lowered to $22,000.

[grnmnstr]

For those interested, the car will be at the Atco BOP race in NJ next Sunday. November 10.

Motivated seller.

[grnmnstr]

Spring is here!!!

New Price.......

$20,000 or best reasonable cash offer

Turn Key bracket car or cruise to the car shows
You know you can not build a car for this price.

[grnmnstr]

Lowered again.........

...............to................

$18,000