FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
For Sale: Northwind 4500 Intake
Northwind 4500 Intake for sale. $200.00 obo plus shipping. Located in Boise, ID 83716.
Port matched to my heads approx. 1.2"x 2.44" Milled ~0.030 on each side for proper alignment. Drilled 1/4" NPT at back side of plenum for PCV. Lightly painted with Pontiac metallic blue....paint coming off in a few places. Throwing in a 1/2" Phenolic spacer as I have no use for it. Good intake but since the carb pad is not angle milled I am unable to run a decent air filter due to hood clearance....so putting a Torker II back on. I take PayPal (to a friend) and money orders. PM if interested. |
#2
|
||||
|
||||
Pm sent
__________________
Albert Marquez 1965 GTO TWIN TURBO DCI RA5! |
#3
|
||||
|
||||
Have had quite a few questions about the porting on this manifold.
The manifold was port matched to SCE gasket #128105, except a little taller as I have to trim the top of the gasket slightly. The port was only blended up into the runner about 2". Thanks for inquiring! Manifold is still for sale... |
#4
|
|||
|
|||
PARTS
$200 shipped ?
|
#5
|
||||
|
||||
Sorry for the delay. Sale is pending.
|
#6
|
||||
|
||||
Sold. Thanks PY.
|
Thread Tools | |
Display Modes | |
|
|