FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Z-bar/ clutch pedal repair bushings
Z-bar/ clutch pedal repair bushings these flange bushings repair the wearable egg shaped holes / you will need to weld your male ends & then file fit these to fit . The elongated holes would need to drilled to 3/8" to accept the repair bushing , check both holes on zbar & the clutch pedal hole as well . Welding is only required to fix the male ends on the zbar linkage from the pedal to zbar ends & clutch adjustment rod end . Also makes a nice smooth pedal / non binding . $30.00 for 3 pcs. as per required .
Last edited by chrisp; 07-27-2019 at 07:08 AM. Reason: ad |
#2
|
|||
|
|||
Available.
|
#3
|
|||
|
|||
In stock.
|
#4
|
|||
|
|||
Bump
|
#5
|
|||
|
|||
A few sets left.
|
#6
|
|||
|
|||
|
#7
|
|||
|
|||
Bushings are back in stock.
|
#8
|
|||
|
|||
If the male ends are good then no welding is needed .
|
#9
|
|||
|
|||
Bump
|
#10
|
|||
|
|||
Fits 5/16 [0.3125] ends only set of 3 $30.00 shipped USPS with tracking & delivery confirmation.
|
Reply |
Thread Tools | |
Display Modes | |
|
|