Pontiac - Street No question too basic here!

          
Reply
 
Thread Tools Display Modes
  #1  
Old 01-23-2021, 05:31 PM
ponchorob ponchorob is offline
Senior Chief
 
Join Date: Aug 2007
Location: Austria vienna
Posts: 299
Default 67 428 rope seal

Can someone confirm that the 67 428 also 421 gets the rear main rope seal from small journal engines 326-400 because the havr a wider grooved seal....from 68 .up 428- 455 up they have the thinner one .....

  #2  
Old 01-23-2021, 06:44 PM
steve25's Avatar
steve25 steve25 is offline
Ultimate Warrior
 
Join Date: May 2008
Location: Westchester NY
Posts: 14,787
Default

According to my Pontiac / GM parts book the rear main seal part number 9782831 fits all 421/ 428 and 455 motors and that’s it!

__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!

1) 1940s 100% silver 4 cup tea server set.

Two dry rotted 14 x 10 Micky Thompson slicks.

1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.

Education is what your left with once you forget things!

Last edited by steve25; 01-23-2021 at 07:13 PM.
  #3  
Old 01-23-2021, 07:11 PM
steve25's Avatar
steve25 steve25 is offline
Ultimate Warrior
 
Join Date: May 2008
Location: Westchester NY
Posts: 14,787
Default

All 67 and up 350/400 motors take the 9772826 seal and a 59 to 66 326/389 motor uses the 9772674 seal.

__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!

1) 1940s 100% silver 4 cup tea server set.

Two dry rotted 14 x 10 Micky Thompson slicks.

1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.

Education is what your left with once you forget things!
  #4  
Old 01-23-2021, 08:30 PM
ponchorob ponchorob is offline
Senior Chief
 
Join Date: Aug 2007
Location: Austria vienna
Posts: 299
Default

Thanks for response ..the reason i ask cause the best gasket rope seal 6380s says fits all 326-400 and also but only the 67 428...it seems to tell me that the seal seems to be wide grooved in the 67 428 but not in an 68 428 or later 455...

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:47 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017