FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
SOLID MOUNTS
Wanted to know if any of you guys on here know of any company that makes solid frame mounts for 81 g/p. I'm using the factory block mounts but dont want to use the factory rubber frame mounts.This will be a street/strip car and dont wont the problem of constantly replacing them and dont want a motor plate.Any suggestion would be appreciated.
__________________
PONTIACS RULE |
#2
|
|||
|
|||
Use poly and a limiting strap.
Works fine on my 10 second Pontiac powered Cutlass.
__________________
"resurfacing Pa highways 2 long black strips at a time" 78 Olds Cutlass Drag car PONTIAC powered with 440 (destroked 455), th400, 12bolt with spool 4.10z Best to date 10.00@130.92 mph at 3250# 79 Grand Prix, will be new home for the 440 Goal 9.75z@135mph at 2900# 83 Malibu Wagon UUV Crate 350, Custom T5, 8.5 with Auburn posi 3.73z Making it the Ultimate Utility Vehicle Go, tow and show (not so much show, yet) |
#3
|
||||
|
||||
Shotgun are those poly mounts for a g body or another application. thanks in advance
__________________
PONTIACS RULE |
#4
|
||||
|
||||
PM sent
__________________
Todd Sedlmeier Who ever thought pinewood derby cars would lead to this! October 2004 HPP Shootout participate http://www.highperformancepontiac.co...out/index.html 86 Grand Prix 535 High Port 8.93 @ 153 65 GTO 433 High Port 12.04 @ 113 |
#5
|
|||
|
|||
I use SBC gbody mounts.
10 minutes to do a little trim with a sawall and you are good to go.
__________________
"resurfacing Pa highways 2 long black strips at a time" 78 Olds Cutlass Drag car PONTIAC powered with 440 (destroked 455), th400, 12bolt with spool 4.10z Best to date 10.00@130.92 mph at 3250# 79 Grand Prix, will be new home for the 440 Goal 9.75z@135mph at 2900# 83 Malibu Wagon UUV Crate 350, Custom T5, 8.5 with Auburn posi 3.73z Making it the Ultimate Utility Vehicle Go, tow and show (not so much show, yet) |
Reply |
|
|