FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
64-65 Right side lower control arm
Just need the one side. Should have the 1.9 and 1.65 size round bushing.
|
#2
|
||||
|
||||
for consideration
picked up a 73 442 hood and a 68 gto jack and some trinkets along with 4 control arms from a friend I did not ask my buddy what vehicle this came out of but fairly sure its from a 65 4 door chevelle he parted out, for the front clip his car needed Scott fairly sure the ball joint and bushings are originals no dents or scrapes .... 2o6 465 9one65 |
#3
|
|||
|
|||
I don't know how to identify if they are A-body, F-body or what they might have came from. If they are in fact from a 65 chevelle they would work..
|
#4
|
||||
|
||||
Hi
I knew they were the earlier abody when I grabbed em not having the oval
inner bushing ... and the couple cars he just parted out the f body has a couple unique items on the lowers our a body doesnt Mike just sent me this picture of the car from May as he was parting it out... Scott |
#5
|
|||
|
|||
Scott if the bushing measure out to the 1.9 and 1.67 I'm interested.
|
#6
|
||||
|
||||
and
hmmmm
1.65 and 1.45 ish they must be measured on the contact area of the bushing flange where it presses into the control arm? not in the middle where I am at ... Last edited by Scott Thelander; 07-08-2020 at 02:23 PM. |
#7
|
|||
|
|||
Well crap.
Looks like you have the 66-72 version. https://www.lever-family-racing.com/...lAaVYXOGbUod64 I might still be interested. I have some feelers out for the correct year I'm looking for. Do you have both lowers? Last edited by rohrt; 07-08-2020 at 03:38 PM. |
#8
|
||||
|
||||
I am parting a 64 Skylark if they're the same.....
__________________
Scott Baggiore 66 GTO convertible 389/4 speed (parents bought new) 73 Firebird Formula 400/4 speed 74 GTO 455/4 speed 74 Grand Am |
Reply |
|
|