[rohrt]

Just need the one side. Should have the 1.9 and 1.65 size round bushing.

[Scott Thelander]

for consideration
picked up a 73 442 hood and a 68 gto jack and some trinkets along with 4 control arms from a friend
I did not ask my buddy what vehicle this came out of but
fairly sure its from a 65 4 door chevelle he parted out, for the front clip his car needed

Scott

fairly sure the ball joint and bushings are originals

no dents or scrapes ....

2o6 465 9one65

[rohrt]

I don't know how to identify if they are A-body, F-body or what they might have came from. If they are in fact from a 65 chevelle they would work..

[Scott Thelander]

I knew they were the earlier abody when I grabbed em not having the oval
inner bushing ... and the couple cars he just parted out
the f body has a couple unique items on the lowers our a body doesnt
Mike just sent me this picture of the car from May as he was parting it out...
Scott

[rohrt]

Scott if the bushing measure out to the 1.9 and 1.67 I'm interested.

[Scott Thelander]

hmmmm

1.65
and
1.45 ish

they must be measured on the contact area of the bushing flange where it presses into the control arm?

not in the middle where I am at ...

[rohrt]

Well crap.

Looks like you have the 66-72 version.

https://www.lever-family-racing.com/...lAaVYXOGbUod64

I might still be interested. I have some feelers out for the correct year I'm looking for.

Do you have both lowers?

[importsmasher]

I am parting a 64 Skylark if they're the same.....