About Us

performerrpm · 05:27 PM

i have a front clip from a 66 lemans for sale. ill get some good pictures later and post up
included is the 2 fenders nose piece, core support, hood and hinges, inner fenders and bumper. the nose piece is a little tweeked but i have another thats straight but has had a dent fixed in the front " small amount of bondo" from a previous parts car. everything is pretty solid from what i can see of the front clip but i think its been bondoed on the lower section behind the wheel you can see on the drivers side where its coming loose. wouldnt take much to get them up to snuff i dont think. at this paticular time the bezels and grilles arent included but maybee available later.

250.00 wouldnt be to much to ask would it.

i can help with delivering upto 400 miles so long as iam paid first for the parts

additionally i have the wiring harness from this car and lots of other stuff i wont be using
so if you can use something from a 4 door car let me know.

almost forgot. zip is 74033

Blue '66 · 02-24-2009, 06:04 PM

Do you have the front splash shields?

ponchjoe · 02-25-2009, 12:55 PM

Is this from an A/C car by chance?

performerrpm · 02-25-2009, 03:01 PM

no splash shields

and its non a/c

performerrpm · 02-25-2009, 03:34 PM

gotta few pictures of the front, sorry i didnt have alotta room to get step back and take a good picture and the camera on my phone sux if you get to close. took a couple of the seat too. 1 picture shows the only bad spot on the front seat

lordtyman · 02-25-2009, 03:57 PM

Aloha,

Do you happen to have original black non-air kick panels?

Mahalo,
Rick

performerrpm · 02-25-2009, 04:04 PM

if 4 door kick panels will work for you they look the same as my 2 door ones , i do. looks like the driver one where it kinda wraps around into the door jamb area has a smidge of red over spray on it but i can probaly clean it of. other than that they appear to be in good shape

Too Many Projects · 02-26-2009, 11:48 AM

If you can't sell the clip complete, I am seriously interested in the core support and bumper. I also need lower cowl mount cutouts if they are the 2 bolt style. If the front lighting harness is the same as a 67 GTO, they're on my list as well. I would be more than happy to meet south of KC to pic up.

P.S. nice scoot.......I have a 2000 Springer Softail

performerrpm · 02-26-2009, 12:35 PM

give it a week or so then ill probally seperate the clip, maybee there'll be some interest in just the fenders then maybee sooner. i think there is a difference in the light harness between 66-67. 66 has the wiper harness in it too and i think the 67 is part of the dash harness and comes thrue the fire wall.

i bet that springer looks pretty sharp, a few people has told me to ditch the wide glide for a springer front

performerrpm · 02-26-2009, 01:06 PM

toomany, pm on mounts

Too Many Projects · 02-26-2009, 01:21 PM

Quote:

Originally Posted by performerrpm

give it a week or so then ill probably separate the clip, maybe there'l be some interest in just the fenders then maybe sooner. i think there is a difference in the light harness between 66-67. 66 has the wiper harness in it too and i think the 67 is part of the dash harness and comes thrue the fire wall.

i bet that springer looks pretty sharp, a few people has told me to ditch the wide glide for a springer front

Yes, my wiper wires are on a separate harness....

Here's the Springer. Wish I could ride it.

performerrpm · 02-26-2009, 01:44 PM

that does look good, wish i could ride mine too acorse reason for me is my upsweeps are givin me problems. gotta add some brackets to keepem from crackin.

ill get those pictures soon as my phone charges, my camera took a crap and my phones dead

Too Many Projects · 02-26-2009, 01:55 PM

Quote:

Originally Posted by performerrpm

that does look good, wish i could ride mine too acorse reason for me is my upsweeps are givin me problems. gotta add some brackets to keepem from crackin.

ill get those pictures soon as my phone charges, my camera took a crap and my phones dead

You can email them too. Just click on my username and my email addy is in there.

Too Many Projects · 02-26-2009, 11:38 PM

Any luck getting pics ? I may just buy the whole clip. I need more things too, if they are the same as my 67. The fuel tank with the vent hose and straps, the fuel/license door and the brace between the bumper and rear crossmember. Trunk and glove box locks with retainers extension shaft and keys. Can't tell for sure in the pic of the interior but if the window handles have clear knobs, I'd like them too. Ash tray, arm rest screws.....

performerrpm · 02-27-2009, 12:28 AM

got the pics but didnt have time to download to my computer at home, at work now.

cant help with the gas tank part of it since i need one too and got lucky that this thing came with a new one, but alot of the other stuff i can

only thing i need from this car is the front floor pans and trunk pans and door hinges on front doors. ill get those pictures loaded in the morning

64tempestwagon · 02-27-2009, 01:51 AM

gauges there? I need the fuel gauge if it works...

Too Many Projects · 02-27-2009, 09:12 PM

Quote:

Originally Posted by performerrpm

got the pics but didnt have time to download to my computer at home, at work now.
ill get those pictures loaded in the morning

..........

performerrpm · 12:46 PM

sorry about that toomany, doc give me some pilles friday morning and i been commatose ever since.

the 2 pictures on the left are of the drivers side but i was a little close to it but that side is in better shape than the passneger side "pic far right" even tho you couldnty tell it by lookin. there still pretty solid
especially the area with the cowl mount. the rust isnt thrue the actual pan except where the pass side meets the vent panel. it does have that fuel tank door too

64tempestwagon · 02-28-2009, 02:49 PM

Is the fuel gauge for sale????

Too Many Projects · 02-28-2009, 05:32 PM

Quote:

Originally Posted by performerrpm

sorry about that toomany, doc give me some pilles friday morning and i been commatose ever since.

You dealing with a bad back ??
The floor pan is about the same as mine but I really need the cowl mount worse. Is there any chance you could borrow a digital camera and get some clear pics of the cowl mount and core support. Pics of the fenders would be great too. If everything is good except for the lower fender skin, I will take the whole clip. I'm working on lining up a frame down there for possibly this next week and would pick it all up at that time. Are you able to remove the clip by yourself and get pics ?

Menu

About Us