FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
WTB: Unobtainium battery cable clips 70-71 bird
Looking for a set of battery cable are harness routing clips that mount on the engine mount to block bolts and hold the battery positive cable as it routes up to the starter.
Hard to find bits indeed. Part numbers are 481216 for the front and 478655 for the rear of the mount. Please PM me if you have any that you are willing to sell. Rob
__________________
1969 TA RAIII M40 Auto Cameo White/ Std Blue Int 1970 TA RAIII M21 4-spd Lucy Blue/Std Black Int 1971 TA 455 HO M22 4-Spd Lucy Blue/Deluxe White Int |
#2
|
||||
|
||||
|
#3
|
|||
|
|||
Got a photo? Inquiring minds want to know...
__________________
"At no time did we exceed 175 mph.” Dan Gurney's truthful response to his and Brock Yate's winning of the first ever Cannonball Baker Sea-to-Shining Sea... Still have my 1st Firebird 7th Firebird 57 Starchief |
#4
|
|||
|
|||
This is a picture of the driver side front clip on a 1970 Trans Am. I do not have a picture of the rear one.
|
#5
|
||||
|
||||
__________________
So long, farewell. |
#6
|
||||
|
||||
Thanks for the pic HFR!
Yep - Those are the little rascals that I'm trying to find. I need two sets for my birds.
__________________
1969 TA RAIII M40 Auto Cameo White/ Std Blue Int 1970 TA RAIII M21 4-spd Lucy Blue/Std Black Int 1971 TA 455 HO M22 4-Spd Lucy Blue/Deluxe White Int |
#7
|
||||
|
||||
http://www.forums.maxperformanceinc....d.php?t=414940
Here is the thread where I posted the picture.
__________________
So long, farewell. |
#8
|
|||
|
|||
__________________
You got the teeth of the hydra upon you. Bang A Gong, T-Rex |
#9
|
||||
|
||||
Here's Inline Tube's clip, I've used them before w/good results.
https://www.inlinetube.com/pages/pro...umber=inl11075 |
#10
|
||||
|
||||
http://www.forums.maxperformanceinc....d.php?t=804715
Found the pictures of the clips alone. I wish there was an easier way to search one's attachments (mine is over 2300).
__________________
So long, farewell. |
#11
|
|||
|
|||
rear clip
I have a used one and a nos one bought from a member here, let me know if you are interested in either. chuck
__________________
63 Z-11 JACKSHAW CHEVROLET CAR 67 PLUM SAFARI WAGON 68 ROAD RUNNER HEMI 4- SPEED 69 RA V JUDGE 70 RA III 4- SPEED CONV. GTO 73 FIREBIRD 98 MUSTANG CONV 05 LEXUS SC430 CONV 08 LEXUS ES350 15 SILVERADO |
#12
|
||||
|
||||
Are you sure these are '70-71 only? My '74 looks to have the same clip that holds the positive battery cable on the drivers side engine mount. I also have a 1976 400 that I pulled from a Formula that has two of these on the drivers side. Seems likely any Pontiac engine bird would have them.
__________________
1970 Trans Am 1971 Trans Am 1974 Trans Am 1978 Y88 Trans Am W72/auto 1979 10th Anniversary Trans Am 1984 Trans Am 1993 Trans Am 1999 30th Anniversary Trans Am 2001 10th anniversary Firehawk #104 2006 GTO |
#13
|
||||
|
||||
No- I'm not sure of the date range when these cable clips were used. I just know that they were on the 70 RAIII and 71 455HO engines and that mine are missing.
3tas4me - So do you have a set for sale?? I'm converting my 70 formula to the RAIII exhaust system and will need a third set for that car as well. Rob
__________________
1969 TA RAIII M40 Auto Cameo White/ Std Blue Int 1970 TA RAIII M21 4-spd Lucy Blue/Std Black Int 1971 TA 455 HO M22 4-Spd Lucy Blue/Deluxe White Int Last edited by RAJ7395; 12-19-2019 at 10:22 PM. |
#14
|
||||
|
||||
Quote:
__________________
1970 Trans Am 1971 Trans Am 1974 Trans Am 1978 Y88 Trans Am W72/auto 1979 10th Anniversary Trans Am 1984 Trans Am 1993 Trans Am 1999 30th Anniversary Trans Am 2001 10th anniversary Firehawk #104 2006 GTO |
#15
|
|||
|
|||
Clips
I have found the foward clip used on the 71 and 72 Lemans two barrel cars. But It is not mounted to the block under the first motor mount bolt hole. It is bolted to the block in the bolt hole in front of it closer to the fuel pump. It is usually hard to see covered with grease and road grime. On these years they routed the cable down the front of the motor,not like the 70 Abody V8 non ram air car that went through the tube between the exhaust manifold. If you look at the clip it has two tabs in the top at either side. These lock it in place against the raised casting of the block where it mounts. Keeps it from turning I guess. The other longer clip used on the rear motor mount bolt hole is like the one they repro at Inline Tube. In the pics attached, one clip has the rubber coating removed.
|
#16
|
||||
|
||||
Yep those are the little rascals I'm trying to find!!
__________________
1969 TA RAIII M40 Auto Cameo White/ Std Blue Int 1970 TA RAIII M21 4-spd Lucy Blue/Std Black Int 1971 TA 455 HO M22 4-Spd Lucy Blue/Deluxe White Int |
#17
|
||||
|
||||
So, from what I can see...
The front clip, Group 2.343, PN 481216 (or 1484897), was used on F-body '70 RAIII/IV; A- and F-body, '71 455HO and all '72s. Rear clip, Group 2.343, PN 478655 was used on A- and F-body '70 RAIII/IV and '71 455HO.
__________________
So long, farewell. |
Reply |
|
|