FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
64 rear window channels
Hi Guys By any chance any body knows if the rear window channels for 64 are the same for 65/66/67. ? thanks
|
#2
|
||||
|
||||
65 should be the same....i don't think 66 or 7 will work. The Buick and Olds will probably work too.
__________________
"I know just enough to keep me here, but not enough to get me out" |
#3
|
||||
|
||||
If you're talking about sedans, the '65 is slightly different from the '64 in the way it's attached to the rear inner fender well. When doing my '64 sedan, I found the weatherstip inside to be unavailable. I tried a generic liner, but it would not work---the bottom of the channel was too thick and the window would not roll up.
I spent at least two weeks on those rear windows.
__________________
BONESTOCK GOATS '64 GTO Tripower Hardtop (Wife's Car) '64 GTO Tripower Post Coupe (My Car) '99 Bonneville SE Sedan |
#4
|
||||
|
||||
are you talking about the rear quarter windows?
Is your car a post or hardtop? |
#5
|
||||
|
||||
These sure look like the ones in my 64 GTO
I bought the channel material and replaced that onto the OE metal guide piece on my car. These ( Below)look like they have recently come out. https://www.google.com/search?q=1964...aze24Eg1314KM: Also the vertical channel was not at all easy to find,( and I assume is not available), as it is a guide for the window. I was able to get a felt (fuzzy) pile weatherstripping that I used adhesive to attach. I couldnt find black, so I colored it with a permanent sharpie. It was something like .187 wide ( 3/16) by .250 thick |
#6
|
|||
|
|||
My car is a SW
|
#7
|
||||
|
||||
Does that make it the same as a 4 door?
|
#8
|
||||
|
||||
Probably like the four door Tempests. Not any similarity to GTO's or other two door Tempests.
__________________
BONESTOCK GOATS '64 GTO Tripower Hardtop (Wife's Car) '64 GTO Tripower Post Coupe (My Car) '99 Bonneville SE Sedan |
Reply |
|
|