[ratchetmaster]

My understanding is these disc brakes will work on 70 and earlier B-body Pontiacs like 66 67 68 69? Which cars? Catalina, grand prix, Grandville, etc?

I am not real familiar with the full size big Pontiac lineup.

These are from a 70 Bonneville 455. Included are both sides removed from the upper and lower ball joints and the outer tie rods.

Calipers, rotors, spindles complete. Also included is the master cylinder and the prop. valve with lines going from the master to the proportional valve.

Here are some pics of the setup before removal. Also a pic of the side of the car.
I will post pics of the actual parts I removed later.
$349 plus shipping. My zip is 84062 in Utah

['ol Pinion head]

'65-70 Pontiac B series for the spindles, rotors, & calipers. B series is Catalina, StarChief, Executive, Bonne

Might want to mike the rotors & examine them & see if they even can be turned. Many pull off rotors of this style need replacing. If they're bad, just lightened the load to ship & new rotors can be sourced.

[ratchetmaster]

Thanks for the info.
I will check the rotors . . . they are not real thin but I will find out the min specs and see.

[steve v]

I'm interested in the 455 fender emblems if they're in good condition.

[ratchetmaster]

Steve
I will not be back out to that yard for several weeks. It is a 40 minute drive one way from my house and I am going out of town to the SEMA show in Vegas this week.

When I get back out there, if they are still there, I will check on them.

This disc brake setup is a great deal. And WAY more stopping power than drums!

[steve v]

Thanks Tim! Just let me know.

[gradysgoat]

do u have the engine wiring harness from fuse box and front lights harness dave

[ratchetmaster]

ttt
have not been out to the yard.
I do not have anything but the disc brake setup from this car.
IT is in a local pull a part type yard.

I can look at the wiring. I think it was cut up when they pulled the engine.
Did you just need some replacements for connectors or only interested in a full harness?

[ratchetmaster]

[ratchetmaster]

Forgot to mention the flex line brackets from the frame are also included.

This is the complete system but NO booster.

Rotors are good at

1.212"
and
1.207"
So plenty of meat left.

[ratchetmaster]

Hmmm . . . I can't edit the original post.

Parts are OBO.

TTT

[ratchetmaster]

Still have not been back to that yard. Maybe wednesday.

ttt

[aldbeir]

good luck a lot of people told me these were in demand. so i took them off the car and offered them for sale here. i think i will put them back on the car so i can move it around.

[rustyrelic]

rachetmaster,

Sent a PM about the brake rotors.

[ratchetmaster]

Still for sale

BTW I checked on the emblems and someone had tried to pry them off. Broken. Sorry.

[ratchetmaster]

Still available.

[ratchetmaster]

ttt

[bluesmobile]

Sent PM.

[ratchetmaster]

Jeremy
just sent a reply.
Tim

[ratchetmaster]

I just realize I wrote the wrong specs for the rotors. I wrote the measurements for the toronado rotors I measured at the same time.

It looks like they measure at about 1.24 in. Should have at least one turn on them left.