| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
08-05-2007, 06:06 PM
|
||||
|
||||
Need description of part/kit
Can you give a description or possibly a picture of PN RPC55 ? It is the Convertible Top Bleeder Kit. The 1966 Fisher Body Manual says to drill a 1/4" in a "spare" metal filler cap and solder in a copper tube. Solder needed to make airtight. Then use a piece of 3/16" rubber hose to run to a container of fluid for bleeding the system. It was printed back when you could go to the Pontiac Dealer and get a "spare" metal filler plug!
I would think that this kit has a filler plug with the tube built in and a length of hose? Would like to know before I order. Thanks! Jim
__________________
"Never try to teach a pig to sing. It's a waste of time and it annoys the pig" |
|
#2
08-06-2007, 12:14 PM
|
||||
|
||||
|
We had one in stock so I took a picture.
|
|
#3
08-06-2007, 12:48 PM
|
||||
|
||||
|
I'll take a look at the "filler plug" and see if this will do the trick. Thanks.. Jim
__________________
"Never try to teach a pig to sing. It's a waste of time and it annoys the pig" |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
