[RedDirtRoad]

Bought most of my rear clip from RPS when I did my
Tyrol blue 67 2 yrs ago
They were the cheapest and dropped shipped right from the factory

[Goatboyjohnny]

I ordered a Sherman through our supplier that we use at work a couple years back. It was labeled as a 64-7 A body as I recall. When it showed up it clearly wasn't correct for a Pontiac, and appeared to be for a 64-5 buick. I sent it back, and got a Dynacorn through NPD. If i recall it cost me about $400.00 more for the correct one. Sorry I can't speak on the fitment of the rest of the panel, I needed the rear most section where they all differ, and didn't want to fab and splice in that part, but I'm sure it could be pretty easily done.

[Goatboyjohnny]

Found pics of the 2. The Dynacorn came with a weld-through primer, the Sherman an E-coat finish.

[Cammer-6]

Originally Posted by RedDirtRoad

Bought most of my rear clip from RPS when I did my
Tyrol blue 67 2 yrs ago
They were the cheapest and dropped shipped right from the factory

whos RPS?

[RedDirtRoad]

Reproduction Parts Source
The guys name is Tony. I read some bad reviews but I’ve never had a problem with him and got my parts rather quickly

[Cammer-6]

OK thanks I ll check it out
In reviewing my research Ive got some updates
The parts place now offers 2 versions of full trunk floor
The newest states no modifications needed for 67.But its $100 more
at $799
OPG has also released a full trunk floor for $579. No details as to how it fits
but they are on the left coast,so the difference may be a wash with shipping.
Summit offers that same one branded Restoparts for $688 or a Sherman
for $708.Ames is $699 for Im guessing a Dynacorn,

[Cammer-6]

duplicate
This site is full of surprises

[gtospieg]

If it truly does not require any mods to work for 67 it's well worth the extra $100....