FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
need help to put back my a/c in my 75 t/a
my car is a 1975 t/a were the a/c was removed way back , try to put it back in . need to know this
the compressor has a wire harness with a black ground and a green wire ,were does the green wire hook up to also there seems to be a black small vac hose that comes out from the firewall , were does that go |
#2
|
|||
|
|||
Black wire is a ground, usually hooks up under the bolt securing compressor to bracket.
Dark green wire is essentially the live wire from the AC controls, which runs via pressure switch on the AC drier. There is sometimes a light green wire that runs to the carb solenoid to bump the idle up when AC is turned on. It may be a separate harness on early models. Small black vacuum hose is likely also for heater box controls. It has one main vacuum source and the control changes where it is direct to. |
#3
|
|||
|
|||
Quote:
|
#4
|
|||
|
|||
Not sure this helps much for a '75 400, this is from a '77-79.
403 Firebird AC compressor loom idle solenoid by Aus78Formula, on Flickr Likewise, here's similar era chev but they've jumpered the wire that goes to the blower motor onto same setup. https://www.camarocentral.com/1973_1..._p/wir-265.htm Last edited by Aus78Formula; 03-28-2019 at 06:55 PM. |
#5
|
|||
|
|||
Quote:
|
#6
|
|||
|
|||
Ignore all that, 75 used the combined compressor and heater harness as one including the thermal limiter.
Do you not have electrical diagrams or workshop manuals for it? Haven't saved every second photo you saw online thinking it might be of use one day? 8 days later no one with a 75 has bothered to chime in. |
#7
|
|||
|
|||
https://www.firebirdcentral.com/Prod...Code=HTR%2D166
https://www.firebirdcentral.com/product_p/wir-2025.htm |
#8
|
|||
|
|||
Quote:
|
#9
|
||||
|
||||
Wire and hose pages.
__________________
So long, farewell. |
#10
|
|||
|
|||
Good one, saved.
|
#11
|
|||
|
|||
very good and thanks . only nee to know now ,were does the brown wire from the thermal limiter connect to
|
#12
|
||||
|
||||
It goes into the wiring harness on the driver's side. Pictures are of '74s.
__________________
So long, farewell. |
#13
|
|||
|
|||
Great thanks. Looks like the po cut it off ,hope I can find it
|
#14
|
|||
|
|||
is the brown wire the power source
|
#15
|
||||
|
||||
I never checked. I'll try and pull a book if no one else can answer.
__________________
So long, farewell. |
#16
|
|||
|
|||
any one can help me on this brown wire
|
Reply |
|
|