FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
high torque mini starters
I searched old threads - only brands I really saw mentioned were the IMI, Powermaster and ?hitachi?
Anyway - any one have current advice on best mini to use. 400 w/ only ramair manifolds. MOST interested on ease of installation without inticate adjustments, etc. Thanks, Lou |
#2
|
||||
|
||||
I actually bought one off of ebay two + years ago. The manufacturer was Hi-Test Racing/aka Hi-Test Rebuilders out of California. They had a good price but stater was only rated at 1.4 kv. Most I have seen are at least 1.9kv rated. My last motor was a 12-1 compression deal.Unit came with shims,mounting bolts, and a gauge for measurering drive to ring gear gap. I wound up using no shims but removed a shim between the mounting block and motor to get gear closer to flex plate. There was a foul up on shipping and I recieved two starters !! Rather than having me return the extra starter they made me a deal I couldn't refuse. I just recently lost a tooth off drive gear. I think a under charged battery was the culpret. I called about getting it repaired. No problem,just send it back and it will require two days turn around time. I think I paid like $110.00 for one and then $79.00 for the extra. I judge a product not only by quality but service too. I'm pleased on both counts. There are lots to choose from now and prices are competitive. This is just my experience.
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
#3
|
||||
|
||||
I bought a starter from those folks as well in 2004. He was very helpful. The workmanship looked excellent. I am not running the unit any longer as I reverted to a stock setup again. But I would recommend him for the same reasons.
__________________
-- James Work '67 GTO Convertible "Koerner Built 413 500 hp with a Victor!.. I'll run a stock intake." '75 Formula 400 - Daily Driver - Running with my Home Built 455 and TH400 Details here: http://forums.maxperformanceinc.com/...d.php?t=588372 |
Reply |
|
|