FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
Reply |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Need some SD4 iron duke stuff
Any one know a source for SD4 stuff..the 80s SD4 stuff..151 cid..i need some roller cam bearings, hard parts etc..and ive searched, but coming up empty
__________________
Mark.. The Goat whisperer "I spent a lot of my money on booze, crazy women, and fast cars. The rest I just squandered." |
#2
|
||||
|
||||
I can't remember the name of the company but there's a racing company that was reproducing the SD engine blocks and heads etc for roundy round racing. Maybe someone can tell you but I think they are still making the parts. They may be able to get you the parts you need. Sorry I can't remember but maybe someone will let you know. It's a well known engine building company.
__________________
My Gasser '63 Catalina build. Oh sorry, it's a Street freak. Either way it's a fun build. |
#3
|
|||
|
|||
thats the prob..they are out of business...its Kansas Racing Products
__________________
Mark.. The Goat whisperer "I spent a lot of my money on booze, crazy women, and fast cars. The rest I just squandered." Last edited by marxjunk; 04-15-2017 at 01:35 AM. |
#4
|
||||
|
||||
No I don't. But have a line on a new bronze distributor gear if that would be helpful?
|
#5
|
|||
|
|||
i have that, but i appreciate the offer...
__________________
Mark.. The Goat whisperer "I spent a lot of my money on booze, crazy women, and fast cars. The rest I just squandered." |
#6
|
||||
|
||||
Have you checked ebay, I see couple roller cams, performance intake gaskets, set of forged pistons in there.
|
#7
|
|||
|
|||
yes..but cant find roller cam bearings...i have an SD engine for a sprint car thats brand new, it was built and sat together for over a decade, when it was all easy to get...now its been so long, it has condensation pitting in one cylinder and i may have to do something...may have to bore it or one sleeve..just not sure yet
i want to get some stuff located..my machinist isnt sure he can remove the bearings in it with out killing them..so before we try..id like to find a set..its 5 bearing and they are roller, for the cam it has H beam rods, forged crank an SD head with JE forged pistons, edelbrock carbed intake, with a wicked roller cam...came nearly complete, but someone pinched the rocker system and push rods..along with the Pontiac alum valve cover...need one of those too... I do appreciate all the help..id like to get this together..i have a 63 tempest located..and thinking...i need to hang a turbo and a cam change..ive been wanting to do something like this for 2 decades at least..and its all just falling together.. and i paid $300 for the motor..the guy had no clue what it was, he's a scrapper and pulled it out of a garage from a racers estate...was going to the shredder...
__________________
Mark.. The Goat whisperer "I spent a lot of my money on booze, crazy women, and fast cars. The rest I just squandered." |
#8
|
|||
|
|||
ttt
__________________
Mark.. The Goat whisperer "I spent a lot of my money on booze, crazy women, and fast cars. The rest I just squandered." |
#9
|
||||
|
||||
Nick Arias jr used to sell a SD4 block and parts.
|
#10
|
|||
|
|||
top
__________________
Mark.. The Goat whisperer "I spent a lot of my money on booze, crazy women, and fast cars. The rest I just squandered." |
#11
|
|||
|
|||
Have you tried posting on Pennocks Fiero Forum? There are a few SD4 owners over there and every now and then there are parts being sold.
|
#12
|
|||
|
|||
i find stuff overthere, but no one returns messages or completes anything..i keep trying...
__________________
Mark.. The Goat whisperer "I spent a lot of my money on booze, crazy women, and fast cars. The rest I just squandered." |
#13
|
||||
|
||||
Have you tried Vanderly ? Paul passed away in 2011 so I didn't think they were still doing these but the gentleman I sold my last lot of SD4 parts to, said he had been dealing with them.
Last known contact I have: Vanderley Racing Engines 23525 Ashleigh Drive Gulfport, MS 39503 (228) 539-5454 I looked in my old docs, but don't have a part number for those bearings, just a photo.
__________________
68 Tempest Conv 06 GTO SRM A4 462 Ram Air VI-LXXI motor in progress |
#14
|
|||
|
|||
thanks for the lead...Vanderly seems to be gone..the number is disconnected etc...
i picked up an NOS valve cover..the last thing is the roller cam bearings..ive searched and searched...nothing comes up..
__________________
Mark.. The Goat whisperer "I spent a lot of my money on booze, crazy women, and fast cars. The rest I just squandered." |
#15
|
|||
|
|||
Still looking..interested in anything
Sent from my SM-G935P using Tapatalk
__________________
Mark.. The Goat whisperer "I spent a lot of my money on booze, crazy women, and fast cars. The rest I just squandered." |
#16
|
||||
|
||||
__________________
-- James Work '67 GTO Convertible "Koerner Built 413 500 hp with a Victor!.. I'll run a stock intake." '75 Formula 400 - Daily Driver - Running with my Home Built 455 and TH400 Details here: http://forums.maxperformanceinc.com/...d.php?t=588372 |
#17
|
|||
|
|||
thanks for the link James..if it was close, id buy the whole thing..thats for sure...
__________________
Mark.. The Goat whisperer "I spent a lot of my money on booze, crazy women, and fast cars. The rest I just squandered." |
#18
|
||||
|
||||
He's about 1 hour from me but I have no use for the parts. They look neat though..
__________________
-- James Work '67 GTO Convertible "Koerner Built 413 500 hp with a Victor!.. I'll run a stock intake." '75 Formula 400 - Daily Driver - Running with my Home Built 455 and TH400 Details here: http://forums.maxperformanceinc.com/...d.php?t=588372 |
Reply |
|
|