FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
One piece rear main install
Hi, going thru the directions and wondering for those that have installed the 1 piece seal what you're using for high pressure grease per instructions? Between the seal lips. I have some wheel bearing grease, but wondering if that would work or swell up the rubber?
__________________
Illinois Outlaw Gassers 6.27@107 9.97@131 |
#2
|
||||
|
||||
The only grease I have is Amsoil synthetic wheel bearing grease and I installed a new one piece seal when I installed my new crank two years ago so I guess that’s what I used.
GTO George |
#3
|
||||
|
||||
I used wheel bearing grease too.
|
#4
|
||||
|
||||
My grease isnt synthetic , so wasnt sure if it would be ok or not. Was thinking long term about grease swelling rubber parts.
__________________
Illinois Outlaw Gassers 6.27@107 9.97@131 |
#5
|
||||
|
||||
Wheel bearing grease used on probably 40 of them. No issues or leaks.
__________________
62' Lemans, Nostalgia Super Stock, 541 CI, IA2 block, billet 4.5" crank, Ross, Wide port Edelbrocks, Gustram intake, 2 4150 style BLP carbs, 2.10 Turbo 400, 9" w/4:30 gears, 8.76 @153, 3100lbs |
#6
|
|||
|
|||
Just grease any good grease don't over think it..
|
#7
|
||||
|
||||
Regular wheel Bearing grease is all that's needed, as this area in no way see's the load factor that the wheel bearings do, nor the potential heat build up from the brakes!
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
Reply |
|
|