[burd]

I have a 4” paper type ( hairy hose). What are they going for these days? I see the last design shiny type going to $300 in the box. I can’t even find one on ERape

[Jack Gifford]

?????????????????

[Super Duty D]

Shoot me a PM with a picture and I'll make you an offer.
I assume this is NOS 12 rib never stretched out and in the box.

SDD

[Half-Inch Stud]

Black, fine corrugations? never seen it it.

[Steve C.]

???

Presume not the same

https://www.ebay.com/itm/1968-81-Pon...-/351167332657


.

[77 Canamman]

The top one is the incorrect vinyl part.

When they were available, the retailers are asking $600-$900 for the hairy hoses on Ebay.

Last hairy hose one I bought in 2012 I paid $275.

[burd]

I don’t know what that is.
GM paper type. I see the last design shiny plastic type go fir $300.

[burd]

Originally Posted by Super Duty D

Shoot me a PM with a picture and I'll make you an offer.
I assume this is NOS 12 rib never stretched out and in the box.

SDD

A guy with a SD wants it. I’m just not sure what’s the going rate.

[77 Canamman]

Since it's going on a Super Duty, get $1000 for it.

[Bentwheelbob]

Last one I sold went for $1250. How about a better picture showing the entire hose?

[Firedup6975]

I still need that piece for my 78, but I’m not that fussy to pay $300 for one for the sake of originality, it’s a duct for God’s sake, I’ll get a Repro. Good luck selling it, I’m sure some serious concourse guy will snap that right up.

[77 Canamman]

Originally Posted by Firedup6975

I still need that piece for my 78, but I’m not that fussy to pay $300 for one for the sake of originality, it’s a duct for God’s sake, I’ll get a repro.

The $300 newer issued GM part isn't even right either. You're better off with the aftermarket part for all intents and purposes.

Dorman 96070...

NOT available new anymore from the normal partshouses, but here is one:

https://www.ebay.com/itm/Buick-Chevr...kAAOSwZ2tcQT0A

[Firedup6975]

Originally Posted by 77 Canamman

The $300 newer issued GM part isn't even right either. You're better off with the aftermarket part for all intents and purposes.

Dorman 96070...

NOT available new anymore from the normal partshouses, but here is one:

https://www.ebay.com/itm/Buick-Chevr...kAAOSwZ2tcQT0A

Thanks! Actually Dorman is about 6 miles from me. I attend their car show every year, maybe I’ll just take a ride over there and save the shipping.

[77 Canamman]

Originally Posted by Firedup6975

Thanks! Actually Dorman is about 6 miles from me. I attend their car show every year, maybe I’ll just take a ride over there and save the shipping.

I show their part number number as discontinued. Maybe they will have one there or have a viable alternative.

[Firedup6975]

Why is this part so hard to get? I mean really almost all the TAs have them, mine was missing when I got the car. I will check with Dorman though. Their warehouse is HUGE! There’s gotta be one floating around in there.

[77 Canamman]

Originally Posted by Firedup6975

Why is this part so hard to get? I mean really almost all the TAs have them, mine was missing when I got the car.

Short answer: Because these cars are very, very old.

This same hose was also used on the same era mid side and full size Pontiacs too.

[bird72]

I threw one out thirty years ago

[Firedup6975]

Originally Posted by bird72

I threw one out thirty years ago

Stop it Anthony!

[RocktimusPryme]

That's crazy. I mean I guess I get it, if your car is 99.9 original GM parts and that's the one you are missing.

But man I look at that and Im like "Its that air tube, or a new transmission. One of these seems out of place"

[bird72]

Originally Posted by Firedup6975

Stop it Anthony!

I actually did. it was one of those annoying factory parts that got in the way of hot rodding