FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Instrument Cluster Installation - screw size?
I seem to have misplaced the screws used to mount the instrument cluster and clock to the bezel. Anyone know what size they are? I think they were a fine machine thread self tapping, but not positive. Thanks!
|
#2
|
||||
|
||||
Check inline tube. They might have them. They have a lot of under dash hardware.
__________________
1969 Judge, 4-speed, CR/Parchment, Quasi-Survivor, #'s match - under restoration |
#3
|
||||
|
||||
Or AMK.
__________________
Ed 1968 GTO (Thanks Mom) 2006 Silverado 2007 Cadillac SRX 2015 Chevy Express |
#4
|
|||
|
|||
I believe the AMK # is B-12041 but the minimum order from them is $ 20
|
#5
|
|||
|
|||
1/4" Hex head 1/2" long. I might have some extras.
|
#6
|
|||
|
|||
correct 1/4" head size but make sure the diameter of the tread isn't too big because you will crack the housing when screwing in
|
#7
|
||||
|
||||
Thanks everyone. I refused to think I had lost them so I went through about 30 shoe boxes (labeled) of parts new and used and found them in a box labeled 'ignition and lock sets'. Must have made sense to me when I put them in that box.
|
#8
|
||||
|
||||
Ignition switch is in the dash, and the cluster is it's neighbor.
This is why I never label anything. |
Reply |
|
|