FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
The Body Shop TECH General questions that don't fit in any other forum |
Reply |
|
Thread Tools | Display Modes |
#21
|
||||
|
||||
Can use an air board for much of it.
I sand i. 45 * motions like a gone would make cross hatch. Icing in between a body filler and high build primer helps. And K200 high build primer in a binks model 7 with pressure pot put it in like cake frosting then block it off Use an air fed respirator and careful of isocyanates.
__________________
Happiness is just a turbocharger away! 960 HP @ 11 psi, 9.70 at 146. Iron heads, iron stock 2 bolt block , stock crank, 9 years haven't even changed a spark plug! selling turbos and turbo related parts since 2005! |
#22
|
||||
|
||||
Check out createx colors they are no isocyanates, low VOC water borne paints mainly used for graphics but can be used for whole paint jobs. Can be used Direct to metal really great product. A lot of airbrush artists use it now .
__________________
Happiness is just a turbocharger away! 960 HP @ 11 psi, 9.70 at 146. Iron heads, iron stock 2 bolt block , stock crank, 9 years haven't even changed a spark plug! selling turbos and turbo related parts since 2005! |
#23
|
||||
|
||||
__________________
Happiness is just a turbocharger away! 960 HP @ 11 psi, 9.70 at 146. Iron heads, iron stock 2 bolt block , stock crank, 9 years haven't even changed a spark plug! selling turbos and turbo related parts since 2005! |
#24
|
||||
|
||||
Pulling roof detail sir.
Last edited by BB70; 01-30-2021 at 06:16 PM. |
Reply |
Thread Tools | |
Display Modes | |
|
|