FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
WTB 2 1/4 exhaust manifold flanges w. 3 bolt holes
Hi Guys,
For my '81 TA I need 2 exhaust flanges with 3 bolt holes. The TA had headers and I changed them out for a set of stock manifolds with 3 studs each. (I don't know exactly what Pontiac these came from, could well be from my '72 LeMans Parts car) Now I need these flanges to connect my new 2 1/4 downpipes to the exhaust manifolds. Pypes doesn't have these flanges with 2 1/4" center diameter. I need 2 good ones, they don't have to be brand new. Thanks erik
__________________
'67 GTO hardtop coupe 400 2bbl (sporting a 4 bbl) '70 GTO convertible 400/400, matching numbers, Currently getting worked on again, body in the bodyshop, engine at the machine shop etc!!) '71 LeMans Sport T41 Coupe restomod (GTO clone with Judge stripes and wing) 400/350 '71 LeMans Woody Wagon 400/350 patina project 1975 Grand Am 400 factory sunroof project car |
#2
|
||||
|
||||
Nobody got one of these?!?!?
I really need em badly....can't finish my TA without em!
__________________
'67 GTO hardtop coupe 400 2bbl (sporting a 4 bbl) '70 GTO convertible 400/400, matching numbers, Currently getting worked on again, body in the bodyshop, engine at the machine shop etc!!) '71 LeMans Sport T41 Coupe restomod (GTO clone with Judge stripes and wing) 400/350 '71 LeMans Woody Wagon 400/350 patina project 1975 Grand Am 400 factory sunroof project car |
#3
|
|||
|
|||
listed in ames perf:
1967-1972 RAM AIR AND HIGH OUTPUT EXHAUST FLANGE (3-BOLT) (RE) Comments USE WITH 2.25" EXHAUST. THREE BOLT FLANGES ARE USED ON BOTH SIDES OF THE 1967 ENGINES. 1968-1972 CARS, THE RIGHT HAND MANIFOLD USES A N180 (3 BOLT), WHILE THE LEFT HAND USES A N180A (2 BOLT) FLANGE. USE N180AE FOR 2.5" APPLICATIONS. |
#4
|
||||
|
||||
Ram Air Restorations also has them
__________________
Its ok to giggle and snicker, Dont laugh and point |
Reply |
|
|