FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
HI GUYS, I NEED A CENTER SUPPORT BEARING FOR MY 2 PIECE DRIVESHAFT THAT THE 59'S AND 60'S CAME WITH.
DOES ANYONE HAVE AN EXTRA ONE FOR SALE? OR KNOW WHERE I CAN BUY ONE AT A REASONABLE PRICE? PLEASE LET ME KNOW. THANKS. AXLE (714)-491-8715 |
#2
|
|||
|
|||
HI GUYS, I NEED A CENTER SUPPORT BEARING FOR MY 2 PIECE DRIVESHAFT THAT THE 59'S AND 60'S CAME WITH.
DOES ANYONE HAVE AN EXTRA ONE FOR SALE? OR KNOW WHERE I CAN BUY ONE AT A REASONABLE PRICE? PLEASE LET ME KNOW. THANKS. AXLE (714)-491-8715 |
#3
|
||||
|
||||
Napa has a listing for the bearing. Most likely will have to order it for you. I don't have the part number handy but I could get it for you. If you need the rubber part redone Steel Rubber products can do it. Hope this helps some.
Outlaw Pontiac Racers Association"For Those Who Live The Legend" Do it now fool! Life is short.
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
#4
|
|||
|
|||
cool! thanks 60man,.....i'll try napa tomorrow or monday. what do you think they charge for them?
one shop i called today said $180! that did not seem right to me. |
#5
|
||||
|
||||
That sounds like a price for the whole assembly!! If they do have one I would snatch it.They are hard to find. I was refering to the bearing itself. I doubt if they run $15.00-$20.00. I haven't boughtone in a while. They are easily removed from the support. I have even welded nuts on top of the old striped out ones to salvage the unit. If you need a part number let me know.
Outlaw Pontiac Racers Association"For Those Who Live The Legend" Do it now fool! Life is short.
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
Reply |
|
|