FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
67-68 Full Size Catalina/Bonneville etc. Rear Wheel Well Molding Extensions
Looking for good condition rear wheel well molding extension for a full size 67-68 Pontiac. This is the short extension to the rear wheel well moldings in front and back of the rear wheel. Moldings come in 3 pieces per side in the rear. Want the lover sections for both driver and passenger side. Just need the lower parts on both sides, not the middle top.
Thanks. |
#2
|
|||
|
|||
What year & which body. Bonneville is approx 4" longer behind the wheels
than a Cat. So the moldings behind the wheel are definitely not an interchange. |
#3
|
|||
|
|||
I added those to my Bonneville. I got mine from CPR in Cali. That was several years ago, maybe 10 years, but maybe worth a shot? They were very reasonably priced back then.
|
#4
|
|||
|
|||
mouldings.
If you're looking for the moldings behind the wheel opening on a 67 Bonneville. I have nice ones $35each
|
#5
|
||||
|
||||
I attached a parts list to show the part I’m looking for. I’m actually putting them on a 68 Grand Prix. The car came with fender skirts. They have been removed so I want to put the wheel well molding on so it will match the front. I already have part #8 for driver & passenger side. Now I need part #7 and #9 for driver and passenger side. That would be 4 parts I’m looking for. Some call them extensions and some call them end caps? My understanding is any 67 or 68 Full Size Pontiac will fit? The 2 top center pieces I got, part #8 fit the Grand Prix perfectly. My understanding is if you ordered a car with fender skirts it didn’t have these moldings.
Thanks |
#6
|
||||
|
||||
Here is a photo of the parts I'm looking for. Pretty sure if they are on a 67 or 68 Catalina, Bonneville, Ventura, Grand Prix they are the same?
Part # 9788930 & 9788931 Front Moldings Rear Wheel Well Part# 9788946 & 9788947 Rear Moldings Rear Wheel Well Last edited by Grand Prix 68; 03-08-2021 at 01:33 PM. |
Reply |
|
|